long nose for Breeze Mode X RC plane

对于大佬Dr. J. Ma发布的Breeze Mode X RC plane小飞翼的改进配件，600mm长机鼻，

使得在使用petg打印全机的时候不再需要很大的电池平衡重心，有效减轻全机起飞重量，同时内部很大空间可以装下额外配重块

由于接触面较小，请务必使用强度较高的胶水仔细对齐后粘接，机鼻曲面形状是我随意设计，可能会影响气动

我的机翼使用R3d经济型透明petg打印 透明petg意外地特别适合旋转花瓶模式打印

值得说明的是，我在这里提供了两种不同的机头延长方式，其中一种需要和原作者提供的机头连接到一起，形成一个加长的机头。另一种是作为一个独立的机头，提供了加高的空间用以竖直放置3s锂电池，最大支持2200mah 3s锂电池

For the Breeze Mode X RC plane released by Dr. J. Ma, the 600mm long nose is an improved accessory to the Breeze Mode X RC plane.

The 600mm long nose eliminates the need for a large battery to balance the center of gravity when printing the whole plane with petg, effectively reducing the takeoff weight of the whole plane, besides, there is plenty of space inside for extra weights.

Due to the small contact surfaces, please make sure to align the surfaces carefully use a strong glue , the curved surfaces are designed at my discretion and may affect the aerodynamics.

My wing was printed on R3d economy clear petg. Clear petg is unexpectedly good for rotating vase patterns.

It's worth noting that I've provided two different methods for extending the nose of the aircraft. One method requires connection to the original author's nose design to form an extended nose. The other is an independent nose design that provides additional height to vertically accommodate a 3s lithium battery, supporting a maximum of 2200mAh 3s lithium battery.