Gardena quick connector set - Free 3D Print Model

Search models, users, collections, and posts

T_WITHE

Household>Garden

IP Report

Print Profile(3)

All

P1S

A2L

P1P

H2S

P2S

H2D

X2D

H2D Pro

X1E

H2C

X1 Carbon

A1 mini

0.12mm layer, 4 walls, 30% infill

Designer

11.1 h

2 plates

4.8(515)

Print needed connector only 0.12mm layer,4 walls,30% infill

10.3 h

13 plates

4.7(143)

Inner 1" (M18) with collar

1.2 h

1 plate

4.7(16)

Open in Bambu Studio

Boost

6349

19922

751

409

16.1 k

8.7 k

Released

Description

Welcome! I am pleased to share with you the Gardena quick connector set that I designed in various sizes to perfectly meet different connection needs. The set is available with different threads and sizes:

External and internal threads
Sizes: 3/8", 1/2", 3/4", 5/8" 1" (M18)
Traditional BSP thread

Material Choice For the best results and long lifespan, I recommend the following materials for printing: PETG, ASA, ABS. PLA can also be used, but I strongly recommend the former materials.

Sealing Rings Sealing rings can be printed from TPU material as it is flexible and waterproof. However, for the best results, I recommend using factory sealing rings, especially O-rings, to ensure maximum water tightness and long-term reliability.

It's important to note that high pressure can cause leakage or other issues, so I do not recommend using the connector at high pressure!
I experienced slight leakage at 6 bar, so please don't leave negative feedback because of this. Thank you!

For supports, if possible, use support material, or use PETG-PLA or PLA-PETG interface layer mode.

Thank you for choosing this 3D printable Gardena quick connector set! I hope you find it useful. If you have any questions, feel free to reach out to me!
If you have any suggestions or requests, please contact me.

This is a revised version of my original model with some additional sizes: https://www.thingiverse.com/thing:4904221