Voltz__

Kamenicki LKJM

Très bonne impression.
Seules choses dommage selon moi :
1- il manque l'ouverture pour l'airflow : j'ai commencé à la faire à la main (voir photo)
2- ce serait mieux que la protection aille jusqu'en haut de la cigarette électronique 

Very good print
My only minor issues
1- the airflow opening is missing: I started to make it by hand (see photo)
2- it would be better if the protection extended to the top of the electronic cigarette

Michel_Dgx

0.2mm layer, 2 walls, 100% infill

Toutes mes excuses, la seule raison pour laquelle je ne l'ai pas fait étendre au sommet de la vape est parce qu'à l'époque, je ne me souciais que de la protection latérale extérieure, ainsi que du port de ventilation sur le côté, je l'ai juste importé après l'avoir personnalisé à mon goût parce que je pensais que quelqu'un d'autre aimerait au moins le mien puisqu'il n'y en a pas

My apologies the only reason I did not extend it to the top of the vape is because at the time I was only concerned with the outer side protection as well as the side ventilation port I just uploaded it after customizing it to my liking because I thought someone else might at least like mine since there aren't any

RaPo

Habe ein Hard(PLA) und ein Soft(TPU)Case gedruckt, passt prima.
Danke fürs teilen! 😎👍

I printed a hard (PLA) and a soft (TPU) case, they fit perfectly Thanks for sharing 😎👍

JaegerMEIER

Good print. Teste with PrintaLot PLA Flex. Argentine brand. I notice it's missing the side hole for the other air intake. I might try to print it in TPU later, but I'm new on this and I just got my hand on some TPU so I bet I'll struggle.

LetsRock

only original, this honestly was the first thing I ever tried to make so there is some slight errors on fitment, I unfortunately do not have the vape due to possible garbage incident

gladiofpv

Ninjas 3D Print

CreArtEure

gute Passung leicht zu drucken ,  wenn auch viele Stützen benötigt werden .  

Excellent fit, easy to print, although many supports are required

user_2663430978

Danke für das Feedback! Wird die Probleme zur Kenntnis nehmen

Thank you for the feedback! We will address the issues

cover

vape case front_84a7b212-b504-4051-a02c-1ee1740b5ac4.jpg

vape case side_d77181ce-6f6b-4d20-abfc-6fbce61949b9.jpg

vape case bottom_832a4792-0d19-4e55-8a7e-a3f4d0b0f86b.jpg

plate_1.png

plate_1.webp

vape case front_84a7b212-b504-4051-a02c-1ee1740b5ac4.webp

vape case side_d8b5e9e9-a986-45d7-b766-11fd759b8cdf.webp

vape case bottom_11fb38c2-8794-4667-ba5a-d2bd7ee01b54.webp

Sparse infill density : 100%supports needed at a threshold of 90 degrees, recommend using tree(auto) and set to on build plateOrientation of print is preferred to keep as isREMEMBER to scale to 99.00 if not done so already

Case for Vaporesso Luxe Max, has been tested with Polyterra pla and Overture TPU, feel free to test with other material and let me know how it printed, any feedback is greatly appreciated, thank you

Print Profile(1)

Description

Comment & Rating (25)

License

Related Models

Vaporesso Luxe Max Case

Print Profile(1)

Description

Comment & Rating (25)

License

Related Models