De Loome

0.2mm layer, 6 walls, 25% Gyroid infill

ist sofort beim einhängen der flex auseinandergebrochen. wandung ist viel zu schwach ausgelegt. in einer schlosserei gehts grob zu da ist so modelbauzeug echt schade. sonst aber guter druck nur eben viel zu schwach

It broke apart immediately upon hanging the flex. The wall thickness is far too weak. In a metalworking shop, things are rough, so this model-making piece is a real shame. Otherwise, a good print, but just far too weak

Braax

Supports are not enabled by default, and while the print works without them, it looks very poor

user_2143190975

Ford Ranger

timififilger

PROGETTAZIONE MECCANICA MM

sesch04

perfect just what i needed, for some more system in the workshop

derleonhardt

Der Dicke

Stefan 0815

David

cover

IMG_5258_2071d7d0-4038-4b06-8564-20194b25f1e1.jpeg

IMG_5257_312dc0df-5dca-4e9b-9137-3e240f5732b7.jpeg

Bildschirmfoto 2024-05-12 um 10.40.11_5de966b6-fec2-494e-9291-0442df7e9e8f.png

plate_1.png

Raroun

RAR00155.JPG

RAR00156.JPG

RAR00157.JPG

RAR00158.JPG

2024-07-24_e5f41d550d409

i wasn´t able to print this model with the Bambulab mobile app, so i created this print profile.<ul><li>0,2mm layer height</li><li>25% Gyroid infill</li><li>Print with Support</li></ul>&nbsp;&nbsp;

Print laying flat with supports for more strengthAtatch to wall with five 4mm screws

Bosch Professional GWS 18V-10 125mm grinder holder

ASIA

Print Profile(1)

Description

Comment & Rating (20)

License

Related Models