Search models, users, collections, and posts
(Brushless) Vertical Turning Fighting Robot - Modao V2.2 Edition
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 100% infill
Designer
4.8 h
4 plates
Open in Bambu Studio
Boost
24
43
0
0
52
8
Released
Description
Content has been automatically translated.
The assembly video for the vertical spinner combat robot "Modao" was updated on June 24, 2024:
Electronic components and hardware can be purchased according to the BOM list below. If you prefer not to bother, you can also search for "老周智造" on Taobao to purchase them
Below is the Modao BOM list
| Modao v2.2 BOM List | ||||
| No | Name | Quantity | Remarks | |
| 1 | Laisai 6.0 Remote Controller | 1 unit | Electronic Components | |
| 2 | Remote controller batteries | 2 units | AAA 1.5V dry cell batteries | |
| 3 | Laisai 6.0 Receiver | 1 unit | Apply double-sided tape to the center of the front, shorten the PWM output pins, and remove the PWM base | |
| 4 | Switch power adapter cable | 1 cable | Self-made (requires 1 piece of 2.54 terminal wire 22AWG 2-pin double-ended, and 1 slide switch) | |
| 5 | 1806 brushless motor and ESC | 1 set | The ESC and motor need to be connected and soldered with DuPont wires | |
| 6 | Laisai Drive Motor Type B | 2 units | ||
| 7 | 10x42mm sponge wheels | 2 units | Use 3 silver M2.5x6 Phillips self-tapping screws to fix the wheel hubs | |
| 8 | 2s 300mAh LiPo battery | 1 piece | Part number LS37200 | |
| 9 | 2s LiPo battery charging cable | 1 unit | ||
| 10 | M2x6 hex socket screws | 6 pieces | 4 pieces for fixing the 1806 brushless motor base, 2 pieces for fixing the wheels | Hardware |
| 11 | M3x10 hex socket screws | 4 pieces | for fixing the front shovel | |
| 12 | M3 press nuts | 4 pieces | for fixing the front shovel | |
| 13 | M2x6 Phillips self-tapping screws | 18 pieces | 5 pieces for fixing the receiver top cover, 9 pieces for fixing the top cover plate, 4 pieces for fixing the left and right ears | |
| 14 | M2.5x8 Phillips self-tapping screws | 2 pieces | for fixing the motor mounting block | |
| 15 | MF105ZZ bearing | 1 unit | 5mm bore | |
| 16 | M5 washer | 1 unit | 2mm thick | |
| 17 | M2x6 silver countersunk Phillips screws | 4 pieces | for fixing the drive motor | |
| Modao v2.2 Printed Parts List | Remarks | |||
| No | Name | Quantity | ||
| 1 | Vertical Spinner Modao Chassis | X 1 | White PLA+ (eSUN) | Printed Parts |
| 2 | Modao Receiver Top Cover Plate | X 1 | White PLA+ (eSUN) | |
| 3 | Vertical Spinner Modao Motor Mounting Block | X 1 | White PLA+ (eSUN) | |
| 4 | Vertical Spinner Modao Left Ear | X 1 | Red PLA+ (eSUN) | |
| 5 | Vertical Spinner Modao Right Ear | X 1 | Red PLA+ (eSUN) | |
| 6 | Modao Weapon-A | X 1 | Red PLA+ (eSUN) | |
| 7 | Vertical Spinner Modao Front Shovel | X 1 | Black PLA+ (eSUN) | |
| 8 | Vertical Spinner Modao Top Cover | X 1 | Multi-color print, Red, White PLA+ (eSUN) | |
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)