Kendrick Lamar - TPAB (2 Sizes)
Print Profile(1)
Description
Easy print with AMS. Available in sizes 100x100, 150x150
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used in my pictures:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #17 (1.44mm) swap to Ash Gray
At layer #18 (1.52mm) swap to White for the rest.
Boost Me (for free)
Please consider boosting my models! Boost points support me greatly by allowing me to offset cost when purchasing filament for testing models!
Membership
Note that this file and/or prints must not be resold without direct permission - commercial options are available by joining my seller tier membership.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)