Articulated Shark by mcgybeer

mcgybeer

Toys & Games>Other Toys & Games

Print Profile(8)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Shark B, 0.2mm layer, 2 walls, 10% infill

Designer

1.2 h

1 plate

4.8(256)

Shark A, 0.2mm layer, 2 walls, 10% infill

Designer

1.2 h

1 plate

4.8(65)

Shark C, 0.2mm layer, 2 walls, 10% infill

Designer

1.1 h

1 plate

5.0(19)

Shark D, 0.2mm layer, 2 walls, 10% infill

Designer

1.1 h

1 plate

4.9(9)

Click to see more

Open in Bambu Studio

Boost

849

1355

387

202

3.2 k

Released

Description

The original Articulated Shark is finally on MakerWorld!

XY compensations have been tuned because Bambulab printers are way too precise 😂 (and this model was designed back in 2019). Note that the upper teeth rely on the bottom ones to be printed, that's why a well-calibrated gap is so important. If it fails or it is too hard to open the jaw feel free to adjust the XY compensations yourself. I've provided a head so you can test the settings without wasting too much material.

4 Versions available:

Shark A: Original design, movable jaw
Shark B: Friendly face, movable jaw
Shark C: Original design, NON-movable jaw
Shark D: Friendly face, NON-movable jaw

After printing, the tail and the jaw should get free with a little force (a small knife may help you for the teeth):
https://youtu.be/14z1ll9yMmU

Then just enjoy it, even in the water!!
https://youtu.be/E1W-RyH8bGA
https://youtu.be/aV-XhMr7Edc

Check here for Commercial License

Comment & Rating (387)

@user_1944099414

Turned out great, but the bottom teeth are stuck to the top so I can’t open the jaw.

@user_3947224844

I’m relieved I’m not the only one with this problem

@Dave8781

I used a swiss army knife; it's not super-fragile and if you give it a minute or two the mouth will open

@Smoothies1

Print Profile

Shark B, 0.2mm layer, 2 walls, 10% infill

Prints great but the jaws are stuck on mine

@user_1547435908

Boosted

Try using a small knife. They do tend to stick, but can easily be opened with a knife.

(Edited)

@jperry13

Boosted

Well done! I like the fact that you can change the orientation of the tail.

@Ogarl69

try using variable layer height in your slicer, itll make the top look alot smoother !

@Rober7Crow

Print Profile

Shark A, 0.2mm layer, 2 walls, 10% infill

nice

@tuxino

Print Profile

Shark B, 0.2mm layer, 2 walls, 10% infill

Could have benefited from adaptive layers to reduce the rings on the top.

@user_1284996834

Print Profile

Shark B, 0.2mm layer, 2 walls, 10% infill

it came out great

@Tech_Craft

Print Profile

Shark A, 0.2mm layer, 2 walls, 10% infill

looking clean

@user_3054347870

Print Profile

Shark B, 0.2mm layer, 2 walls, 10% infill

Perfetto unansuper stampa

@EiNkEl

Boosted

Flawless printing, except for the mouth which had to be unlocked with a knife when finished (easy). My kids loved this model, good job!

@jasiek_M

Print Profile

Shark B, 0.2mm layer, 2 walls, 10% infill

amazing shark

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Shark Pendant

Sevro

115

134

Articulated Shardscale Dragon (50cm)

hollowmaker

147

237

Articulated Elephant (Print-in-Place)

kida

132

233

Rayquaza - Articulated

SpaceMan_03

230

261