davemoneysign

cover

Screenshot 2024-05-13 233145_3801bfc9-9ec7-4e18-b10a-53d7b35993f2.png

Screenshot 2024-05-13 233158_dde61027-2e4e-405b-8bfb-b2f217acf3aa.png

Screenshot 2024-05-13 233211_66021b4b-8590-44cf-808c-3b5e6ec9bf5a.png

plate_1.png

20240517_075840_354e32b4-bb62-4616-a09b-8761e077fa73.webp

0.2mm layer, Vase Mode

PLAsse

1736174349103.jpg

wanted one in a smaller size, so i could more easily fill it up with stuff likke wrapped hard candies and have around my desk.

60% size 0.16mm layer, vase mode, .4 nozzle, 0.6 line width

1736080768588.jpg

Wider line width and more bottom layers to make the model more rigid and durable. 0.16 layer height to ensure better layer adhesion and better visual print quality.

Vase mode with 0.6 line width on 0.4 nozzle, 0.16mm layers

zolin7

IMG_20240715_201759.jpg

IMG_20240715_201820.jpg

2024715-123446.jpg

2024715-123436.jpg

2024-07-15_4cd697dd5a7ac

0.2mm层高无支撑提高强度，墙数3，填充密度10%重新挖空设计，更结实耐用！

0.2mm layerNo supportsIncreased strength, 3 walls, 10% infill densityRedesigned with hollowing, more robust and durable!

0.2mm layer, 3 walls, 10% infill

drodfro

IMG_20250212_222844.jpg

IMG_20250212_222858.jpg

Increased the outer wall to 1.2mm with a 0.6 nozzle. It works just fine and ends up quite strong. Mine came out with very, very minor defects in some areas but completely fine and negligible

80%, Vase mode, 1.2mm wall, 0.6mm nozzle, 0.24mm layer 

JuanDeLaRossa

Paper Bag1.jpg

paper bag2.jpg

Paper bag3.jpg

VASE Mode 0.4 NOZZLE<ul><li>0.2mm layer height</li><li>0.6mm layer width</li><li>Vase mode</li><li>No Support</li><li>Quick Print!</li></ul>

VASE 0.4 Nozzle 0.2 Layer 0.6 Layer Width

Hubert_kw

IMG20251205082311.jpg

0.2mm layer, 1 walls, 0% infill

𝔱𝔦𝔪𝔬

20260216_201225.jpg

0.8mm Nozzle 0.48mm layer height 1mm initial layer 1.2mm outer walls Maxed out volumetric flow Tweaked PLA Profile included, with necessary tweaks (reduced fan speed to 70% max and increased hot end temp to 230c) should work just fine on all other printers, but I ran this on an A1 Mini <a target="_blank" rel="noopener noreferrer ugc" href="https://youtube.com/shorts/wthl24CEIW0?feature=share">Click to see a video of the quality of the print</a>

60% 0.8mm nozzle, 1.2mm outer wall 48 minute A1 Mini profile

We were testing out our Hexagon Absolute 83 ScanArm in the lab and wanted to try something organic.  We happened to have a crumpled up Taco Bell bag so I scanned it.  The model is solid, but it is recommended to print it in Spiral Vase mode.

Print Profile(8)

Description

Comment & Rating (1014)

License

Remixes (8)

Related Models

Taco Bell Bag Vase Mode