Partmaker

cover

IMG_3801_32588c85-24ca-408a-bedc-157a015ec237.jpeg

IMG_3802_ca9e70b2-7d77-4074-a456-b844029d507b.jpeg

IMG_3803_1e3dd463-ccdc-4f02-a175-9de4f75d7541.jpeg

plate_1.png

IMG_3801_32588c85-24ca-408a-bedc-157a015ec237.webp

0.2mm layer, 4 walls, 15% infill

Vorrac

plate_1.webp

Resized to fit A1 Mini Pistachio Bowl 2.0

HotFix

20240524_002253_181e3694-ae2d-449b-9f54-fff5d88e2954.webp

20240524_002310_99cab71e-57dd-4a15-9b70-cd2842481d7c.webp

I noticed when I went to pick up the bowl with the lid on it that I instinctively put my thumb into the opening which was great until the lid started to come up as I walked with it. So I jumped into Bambu Studio and did some duplicaiton and mesh Boolean work to take the same outer ring on the rest of the bowl and duplicate it (and then some) around the gab. The result was now a lid that says in place when I put my thumb through the hole (and subsequently the new “D-ring”). I played with the top and bottom surface patterns as well as infill because I print all of these out of translucent PETG (#1 I have kids who are rough on stuff and #2 I read PETG is “safer” around food). I am sure you could speed it up by resetting them back to the default patterns, but even if you do I still recommend stick with PETG as I'm worried PLA would be too brittle on that small piece. MAD RESPECT for the OG designer for coming up with the original model, and also for giving me the nod to post the “remix” as a print profile here so it's 1 stop shopping for everyone.

Lid with additional "D-ring" - meant for PETG

Epiq3D

Pistachio bowl 2.0

Hello there,&nbsp;I designed a lid for the <a target="_blank" href="https://makerworld.com/models/457859" rel="nofollow noopener">Pistachio bowl 2.0</a> by TechDesigner.&nbsp;Cheers!

Print Profile(3)

Description

Comment & Rating (161)

This remix is based on

License

Remixes (1)

Related Models

Lid for Pistachio bowl 2.0