8 Trays HDD Enclosure (SATA/SAS)
Print Profile(3)
Description
8 Trays HDD Box for NAS/Server
Fully printed enclosure (you can print the external case or make your own in wood/metal/aluminium)
Using long SATA/SAS cables, so no complicated electronics
All parts are easily available on Amazon/Aliexpress/Ebay
Trays are available for 3.5 and 2.5in HDD/SSD
Connect the fan to the 12V wire (Yellow)
Connect the LED with the resistor to the 5V wire (Red)
Overall dimensions: 268mm (10.55 in) wide, 214mm (8.43 in) depth, 152mm (6 in) Height
Bill of Materials:
42x - Torx Screws #4 x 1/2" - McMaster #99512A219
8x - Socked Head Screws M3 x 22mm - McMaster #91290A124
1x - Computer Fan 120mm (with 4 screws)
1x - 5mm LED + resistor
2x - Quad SATA 1 Meter Cable (or SAS if you have a card) (see pictures)
8x - SATA Adapters Male to Female Straight (see pictures)
8x - SATA Power connector (Puncture type without soldering, can be salvaged from old cables) (see pictures)
Some 16 gauge wires to create your power cable (2x Female molex to one end)
If you want smaller check my 4 Trays box.
(12 Trays 3U rack mountable coming soon….)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (164)