Search models, users, collections, and posts
Dark Army - Mr Robot - Hueforge
IP Report
Print Profile(2)
0.08mm layer, 2 walls, 100% infill
Designer
8.8 h
1 plate
AMS compatible, 0.08mm layer, 2 walls, 100% infill
8.7 h
1 plate
Open in Bambu Studio
Boost
15
24
9
6
17
8
Released
Description
Dark army design from the mr robot series.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 153.11x234.01mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.3
PLA Generic Red Transmission Distance: 4
PLA Generic Gold Transmission Distance: 6
PLA Generic White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (1mm) swap to Red
At layer #16 (1.4mm) swap to Yellow
At layer #22 (1.88mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (9)