Search models, users, collections, and posts
Print Profile(3)
0.16mm layer, 4 walls, 15% infill - 10L Watering can 26,7mm
Designer
6.2 h
2 plates
0.16mm layer, 4 walls, 15% infill - 5L Watering can 22,4mm
Designer
4.2 h
2 plates
0.16mm layer, 4 walls, 15% infill PETG
3.9 h
1 plate
Open in Bambu Studio
Boost
179
419
85
27
733
517
Released
Description
Garden watering can sprinkler
!! It is recommended to clean the print bed before printing !! - Use normal dishwashing detergent, rinse thoroughly and dry !
This is a Garden watering can sprinkler, suitable for watering can from “Geli” 5L_(22,4mm) & 10L_(26,7mm)
2 different hole diameters 1,4mm and 1,2mm
Compared to the original, I changed the hole design and the scaling !
Layer height : 0,16 , line width : 0,4 , Walls 4 ;
infill 15% ; no support ; print time ~ 2 h = 5l sprinkler /~ 3 h = 10l sprinkler
Jayo PETG Black
MakerWorld : https://makerworld.com/en/@sweb3791
My Models : https://www.printables.com/de/@CB_384764/models
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (85)