JOLT Zhu Rong Kit Modification One-Button Eject Push Rod - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

法修

Props & Cosplays>Cosplay Weapons

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 5 walls, 20% infill

14.1 h

4 plates

5.0(1)

0.08mm layer, 5 walls, 30% infill

25 min

1 plate

Open in Bambu Studio

Boost

117

281

578

Released

Description

Content has been automatically translated.

Show original

You will need a spring with a wire diameter of 0.8mm, an outer diameter of 17mm, and a length of 100mm.
To release the spring, you can dismantle a ballpoint pen. If you want to buy one, a whole pack will cost a few yuan. It's better to buy a ballpoint pen from a stationery store for 50 cents and disassemble it for the spring.
You will need 3 pcs of M3x10 countersunk screws.
As for the seal ring of the push nozzle, use whatever you have, if you don't have any, you can buy an extra one with a wire diameter of 1.9mm.

Comment & Rating (23)

@yx_cxkj

Seeking an answer what accessories are these

The designer has replied

Show original

@user_368193974

This is a part I had my eye on

Show original

@doofus

so the third plate part has a part of it that I am confused how to attach it to the gun. do I have to disassemble the gun?

(Edited)

@user_1148015445

The push-on cap seal 13*1.9mm is too tight…I've purchased other sized o-rings What hardware is required for the sight, could you please specify

(Edited)

Show original

@user_1148015445

Parts Required:- M2x5 Csk (Motor Screws) (4x) M3 Plain Nuts (4x) M3x8 Socket Hd Bolt (1x) M3x10 Socket Hd Bolt (1x) M3x16 Socket Hd Bolt (1x) M3x30 Socket Hd Bolt (2x)