Marge and Homer in the car

A fun double keychain featuring the Simpsons, both keychains are supported by the car, creating a very amusing scene.

It's designed with magnets inside the main body (the car) so you can place it on a fridge or similar surface. Marge and Homer have a small iron washer inside for easy attachment to the car.

I'll create another version with two holes in case someone wants to hang it on a wall.

Simple to print with AMS, although I had to separate Homer into 3 pieces because he had more than 4 colors; you just need to glue the 3 pieces together.

The car is designed to accommodate two 7x3 mm magnets; make sure they're N52 for a stronger hold. When printing, there will be a pause at layer 19 (3.8mm) to insert the magnets. Insert them and resume printing.

Marge has a pause at layer 8 (1.6mm) to insert a pair of 8x0.5mm washers, or similar metal objects. Insert the washers and continue printing.

Homer is printed in three pieces; before gluing them together, insert a pair of 8x0.5mm washers, or similar metal objects.

Enjoy!!