Top of Monitor Shelf - Free 3D Print Model

Search models, users, collections, and posts

Matdanck121

Household>Office

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 10% infill

Designer

6.7 h

1 plate

4.8(108)

Strengthened/Thicker Shelf

Designer

7.9 h

1 plate

4.9(73)

Open in Bambu Studio

Boost

1119

3480

221

3.3 k

1.6 k

Released

Description

I added a Thicker/Stronger Shelf, if you want to use the thicker one i have a print profile just for that or if you want to use the raw files the shelf is by itself so download both files and just delete the shelf part from the first to get the legs nut and pin.

A Shelf for on top of a computer monitor the legs are teethed so that the angle can be adjusted. The shelf dimensions are 225mm x 150mm.

Mine is set up so that the Leg with the pin is on the right and the just plain leg is on left (if you would need to get different degrees of angles you can't get with the leg and pin on right you can switch them). The teeth make it so that you don't have to tighten down extremely hard on the nut just enough to keep them in the teeth.

If you don't use the print profile and just download i would recommend using a height range modifier for the nut and leg & pin for the threads i used .12 layer height and increased walls to make it solid for thread area. The NUT NEEDS TO BE SCALED for clearance-- 103% in X & Y plane worked me, make sure uniform is turned off. i also blocked supports for the threads so they didn't get messed up and for the slowed the layer time down to 7 sec. and min print speed to 14 so the threads would be ok but i was using generic filament.

Comment & Rating (221)

@user_740453843

Why is mine different from what I printed? The angle cannot be adjusted, but it can be used, adjust the angle of the display to make it horizontal

The designer has replied

Show original

@Matdanck121

that is not my model. i dont know what u printed

@singlegundealer

Replying to @Matdanck121 :

DUN DUN DUUUUUUUUUUUNNNNNNNNN

@user_703992170

didn't you take a look in the slicer before printing? Interesting how people manage to print something different than they wanted.

@ChunkyMonkeyTim

Boosted

Just what I needed. Work great.

@user_1876012665

Umm where did you get the socom?

@ChunkyMonkeyTim

Boosted

Replying to @user_1876012665 :

The pistols are by CanadianJedi here on MakerWorld. Great models. Print great using their profile and just fit together!

@milpoooL

Print Profile

0.2mm layer, 3 walls, 10% infill

looks good

@Cirogg

PLA Printed. Strengthened Thicker shelf versions. Broke after trying to adjust the side for the first time.

The designer has replied

@Matdanck121

“the teeth make it so that you do not need to tighten down hard on the nut” that was in the description, you are tightening a nut that goes with the layer lines. it was just made to hold it in place.

@user_1458647227

Print Profile

0.2mm layer, 3 walls, 10% infill

A brilliant idea At last, some workspace

Show original

@iluva3d

Print Profile

Strengthened/Thicker Shelf

perfect model. thicker version real strong

@Jay_Foster515

Boosted

The shelf is much bigger than I thought it was. I also thought You could adjust the leg separately, but they have to be moved together and you can only put the shelf in the middle of a curved monitor. regardless, I love this shelf.

@Gettone

Boosted

Print Profile

Strengthened/Thicker Shelf

very nice

@Dday289

works great really happy with this I was running out of space for minis on my desk and now my second monitor has a purpose other than just discord

@Gettone

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

nice model

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.