Search models, users, collections, and posts
Ajustable Stop für Plunge Saw Guide Rails
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
1.8 h
4 plates
Makita with pause for nut 0.2mm layer, 2 walls, 15% infill
28 min
1 plate
Open in Bambu Studio
Boost
340
1374
83
53
801
521
Released
Bill of Materials
List other parts
- Hex head bolt x 1: M6x30
- Hex Nut x 1: M6
Description
Stop for saw guide tails
I made this stop for plunge saw guide rails it fits with the one from Festool and Makita.
If the stop is flipped you can use it as a router stop.
It is a quick print and if you want two it is a good idea to mirror the “stop”-file.
You will also need:
- 1x M6x30 hex head bold
- 1x M6 nut or M6 heat shrink insert
Thumbscrews:
The print stops to insert the nut.
If you like the Thumbscrews, you can check them out in different sizes: https://makerworld.com/en/models/430531#profileId-335029
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (83)