Knife Handle Cover for uhltimate OTF Fidget Knife
Print Profile(4)
![[A1 Mini] 0.2mm layer, 2 walls, 15% gyroid infill](https://makerworld.bblmw.com/makerworld/model/US48ff3e843cf3d2/74896748/instance/2024-05-06_e89e6ca984d2a.jpeg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
Posting this as requested by the knife creator uhltimate. This is a cover that goes over the handle of his knife to cover the spring! Here is a link to his knife https://makerworld.com/en/models/449279#profileId-356059
Instructions:
Lay the main assembled knife on top of this outer shell as shown in the photos
INSERT FLAT SIDE WITHOUT SWITCH FIRST (SHOWN IN 2nd and 3d pic) - THEN PRESS DOWN THE FRONT SWITCH SIDE (4th pic) BEFORE PRESSING DOWN THE BACK
Press firmly (takes some force) to push it inside and snap the cover over the knife for a tight snug fit!
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (132)