Helldiver figure / statue with Hellpod stand! - Free 3D Print Model

Search models, users, collections, and posts

BigMikeMW

Miniatures>People

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Helldiver Cape only

Designer

3.8 h

1 plate

4.3(4)

0.12mm layer, 2 walls, 10% infill

25.1 h

8 plates

5.0(2)

Open in Bambu Studio

Boost

229

465

462

Released

Description

IMPORTANT: TO DOWNLOAD THE MODEL CHECK THE RAW STL FILES FOR THE REST - .3MF IS ONLY FOR THE CAPE NOW.

A highly edited and polished model of an elite soldier called the Helldiver from the hit 2024 videogame Helldivers 2

If you like the model, please consider printing it and liking it on this page and sharing it with your friends or fellow citizens - otherwise, you might be considered as a bug sympathizer and should expect a knock on your door from the Ministry of Truth.

Instructions:

You may print the parts in any particular order, but I'd recommend printing the big main parts first + the main body connector, and then print one of the small connectors only and checking if it fits, if it's too tight, scale it down and use it that scale for other small pins aswell.

I recommend printing the right hand with the gun and the helmet with a smaller nozzle and layer height for more detail.

The model includes two hellpod stand sizes, but the model should also be capable of standing on its own. You can also use the connectors as a reference to make your own stands.

Happy printing, glory to Superearth!

Comment & Rating (18)

@user_210264018

I scaled it down to 20%, used a 0.2 nozzle, and printed it at a 0.04 layer height. The pins were difficult to install during assembly, so I used super glue directly. The detail after assembly is very good

Show original

@choi18

Boosted

Sweet Libertea!! Printed this at 150% and looks awesome! It took me almost 12hrs. Only left to print is the cape and stand. Thanks man! 🤟

@machalek_

Great model. thx

@LuminousRoo

Print Profile

Helldiver Cape only

(Edited)

Missing Model Parts: This was only the cape. Should be titled helldiver cape so it is not misleading. Author states in reply comments to download the STL. That only works for people using Bambu Studio and not those of us who can only utilize Bambu Handy.

Bed Adhesion Issue: Print made it to the fan of the cape and failed at the last 5% of the print where the print cleanly detached from the print bed. The print bed was cleaned prior to this use and allowed time to dry. The room was kept at about 70 F with humidity at 40%.

The profile uploader has replied

@bigmikemw

Thank you for the feedback, I renamed the print profile so it's clear that it is the cape only. I haven't created 3mfs for the rest of the parts, so unfortunately I can't help you there, if you have a computer, or a friend with a computed that can slice you the 3mf, try asking them. For the print adhesion issue, can you show me the print? I'll slow down the 3mf at that part so It is more stable

@ElC_3627395543

Currently the only download available is the cape, is the rest of the model going to be uploaded? Thanks!

The designer has replied

@bigmikemw

You can download the raw files - stls :)

@bigmikemw

Here

@ElC_3627395543

Replying to @bigmikemw :

thank you!!

@Niesmuschel

Boosted

Print Profile

Helldiver Cape only

@DanielSchenk

Boosted

JOIN THE HELLDIVERS Printed great! The Ministry of Art approves your work! Do you perhaps have another version with higher resolution? Im thinking about priting a larger Helldiver...