Enginerd

0.2mm layer, 2 walls, 15% infill

Great 3D Print File for a small footprint carry/storage case for Nikon EN-EL15 batteries.

I previously purchased a twin case that I thought would be great, just to get disappointed at another purchase that didn't quite do a perfect fit-solution.  I like to keep bulk to a minimum and be able to maximize space and least amount of space Vs usefulness...  This design file was PERFECT!

Mirus Plasma

user_2502876761

Blanosul

Highly recommend print in PETG and single colour.  Some PLA is not flexibility enough ( such as pla matte) on retention clip,

Mxmax1985

Martin1967

stijn

Kamil drukuje

zu viel verschleiss vom Material durch die zwei fahrbigkeit

Too much material waste due to the two colors

alps3d

Tip:  Waste a lot of AMS filament to put someone else's initials at the top

jeffjulian

Dirk

cover

2 X Nikon EN-EL15 Battery 19_10_2023 16_56_33.png

IMG_6132.jpg

IMG_6133.jpg

plate_1.png

James colgan

Screenshot 2024-03-29 at 08.47.28_e7604e17-fbc3-455c-9a71-f3cf4b22dcdc.webp

Screenshot 2024-03-29 at 08.46.40_157bbca5-185c-4c7e-938e-2b3d3148d55f.webp

Bean Overlord

45019.webp

plate_1.webp

Melvin

IMG20251216134340.jpg

IMG20251216134326.jpg

IMG20251216134132.jpg

Printed successfully on A1 with Recycling Fabrik rPETG. Should work with Bambu Lab PETG HF and PLA. PETG highly recommended.<ul><li>0,16mm layer height (using 0,4mm hotend)</li><li>Wall loops: 4</li><li>Top and bottom shell thickness: 2mm</li><li>Top and bottom shell layers and penetration layers: 12</li><li>Sparse infill: 100%</li></ul>Settings specific for top layer ironing:<ul><li>Line width - top surface: 0.26mm</li><li>Line width - internal solid infill: 0.3mm</li><li>Ironing - type: top surfaces</li><li>Ironing - pattern: rectilinear</li><li>Ironing - speed: 45 mm/s</li><li>Ironing - flow: 20%</li><li>Ironing - line spacing and inset: 0.1mm </li></ul>

Perfect on A1 series - 0.16mm layer, 4 walls, 100% infill

Protection case cover for Nikon EN-EL15&nbsp;Filament: PLA or PETG&nbsp;Thank you ;-)

Print Profile(3)

Description

Comment & Rating (44)

License

Remixes (1)

Related Models

2 X Nikon EN-EL15 Battery Protect case