Gamesandtoys64

cover

IMG_2655_dd4b7992-dfe6-4a17-b3a2-836a040cacf5.jpg

IMG_2653_95b69e80-f33a-44c2-aba2-25ca69bb7bce.jpg

IMG_2652_cb2e5629-4144-43f7-9343-fa1049e2843f.jpg

plate_1.png

IMG_2651_5bf9f2ff-914d-47d7-98c6-a03fe95252c2.webp

IMG_2653_4e0b034b-98d8-482a-acb6-1efe7ede0895.webp

IMG_2652_72126cc4-3d64-435d-8301-91eddb9af93f.webp

I had a few successful prints and a few failed leg pieces without the brim, so the brim is included on the print profile. however, with the right settings and filament, you may have better luck than me.&nbsp;

0.2mm layer, 6 walls, 25% infill

Body

Small leg tip

plate_2.png

small leg mid section

plate_3.png

Large leg tip

plate_4.png

Large leg mid section

plate_5.png

IMG_2653.JPG

Individual parts

Weisnetde

IMG_3359_b07a1e10-0cda-4961-b026-bcfbb5d80195.webp

IMG_3360_7fa65b10-af83-4470-8673-63837eb7af03.webp

plate_1.webp

easy and clean print but a little strength is required to assemble the spider.arachne, 0.2mm layer, 2 walls, 15% gyroid infill

0.2mm layer, 2 walls, 15% gyroid infill

Body.201%.Legs.199.9%

Maker

200%.banana.jpg

200%.All.Three.jpg

All.Three.Banana.jpg

I love this model, and really liked the 150% scaled. After printing several I decided to see what the max is for my X1C and P1S. This is a 200% scaled version for 0.6mm nozzles! I used 199.9% legs and 201% body which helps with the tolerances for getting the legs into the body easily without popping out.&nbsp;200% Scaled,0.6mm nozzle,&nbsp;0.18mm layer,&nbsp;2 walls

200% Scaled with 0.6mm nozzle, 0.18mm layer, 2 walls

user_1409471613

Screenshot 2025-09-24 at 18.12.37.png

This a a version of the 200% profile but with the layout optimised for an A1-Mini

200% A1-Mini 0.2mm layer, 2 walls, 10% infill

InnovatorBeerJr

PXL_20251015_030618195.jpg

PXL_20251015_030627579.jpg

PETG is best for these joints. MAX A1 mini size Gigantic sized spider PETG strength is considered with these profile settings

295% - A1 Mini - 0.2mm layer, 4 walls, 10% infill

150%and100%.jpg

This is @botaz19's 150% scaled version for 0.6mm nozzles. I have printed so many of these in preparation for Halloween. I use 2 walls instead of 3 due to the 0.6mm nozzle. 2x 0.6mm is 1.2mm width, which is the same as a 3 wall 0.4mm nozzle. Quality is the same at 0.18mm height.&nbsp;With 0.6mm nozzle this has a print time of 2h20minutes with Generic PLA and slightly faster with Bambu PLA.&nbsp;0.6mm nozzle,&nbsp;0.18mm layer,&nbsp;2 walls,&nbsp;10% infill

0.6mm nozzle, 150% scaled, 0.18mm layer, 2 walls, 10% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Articulating Black Widow spider. For the people in your life who freak out at creepy crawlies!

Black Widow Articulating Spider

ASIA

Print Profile(7)

Description

Comment & Rating (527)

License

Related Models