Liquid Woman

An original work of mine where I wanted this to look like liquid metal poured down a wall that formed the silhouette of a woman. Enjoy and as you can see, it works great for pairing colors!

The key to success lies in using matte white! This produces a more solid white overlay compared to the standard white I've found in many brand names, which tends to have higher transparency.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #10 (0.88mm) swap to Silver
At layer #18 (1.52mm) swap to Matte White for the rest.