Meta Quest 3 Skadis Mount BoboVR

With this design I wanted to create an “all in one” solution to properly store the Quest 3 and controllers with the mounted boboVR headstrap. I thought it would be cool to use the Ikea Skadis storage plates for it. I didn't like the existing designs which hang the Quest on the padding, so i designed it in order to hand on the plastic strap. In that way your padding isn't compressed all the time.

I used hooks by Many24 already in the past so I made my design work with these to hang the mount to the Skadis plate. You will need to download and print these hooks by him in order to use my design on a Skadis plate! You can find the hooks here:

https://makerworld.com/en/models/23592#profileId-28439

Alternatively you can also just use screws and mount it permanently to the wall. Just make sure to use enough walls to ensure a proper siffness to resist the tension when using screws.

I simply used PLA+ with the standard 0,2mm Strength setting, it works very good. NO SUPPORTS needed!