Search models, users, collections, and posts

Slug Caterpillar-Caterpillar

Remixed by
mokey
Toys & Games>Other Toys & Games
IP Report

Print Profile(3)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.16mm layer, 3 walls, 10% infill
0.16mm layer, 3 walls, 10% infill
Designer
1.4 h
1 plate
4.2(90)
0.16mm layer, 3 walls, 10% infill
0.16mm layer, 3 walls, 10% infill
Designer
1.4 h
1 plate
4.5(20)
0.16mm layer, 3 walls, 10% infill
0.16mm layer, 3 walls, 10% infill
Designer
7.3 h
1 plate
4.5(4)
Open in Bambu Studio
Boost
438
1041
128
67
2.8 k
1.7 k
Released 

Description

1.原爬行触角接触处及其薄弱，优化了连接薄弱处。

The original crawling antenna contact area and its weak points have been optimized to strengthen the connections.
2.实体为薄壁。

The entity is of a thin-walled design.

3.强烈推荐彩虹色或双色pla材料。

Strongly recommend the use of rainbow-colored or two-tone PLA materials.

4.长度约90mm。

The length is approximately 90mm.

5.欢迎去给原作者充电：_Isaiah_Isaiah Steckling。

Welcome to support the original author : _Isaiah_Isaiah Steckling.

6.推荐打印本配置。

 

Caterpillar Movable Caterpillar

Comment & Rating (128)

(0/1000)
@anthAncze
Print Profile
0.16mm layer, 3 walls, 10% infill
Snail
Show original
2
Reply
@Sting2saw
Print Profile
0.16mm layer, 3 walls, 10% infill
Nice model, however, not all parts were movable for me, only the tail and head
(Edited)
Show original
0
Reply
@Penguinlover124
same
0
Reply
@CassLessThan3
I sized the print up just over 8% because I wanted it to be a certain size, and it still seems maybe too small to properly print with a 0.4mm hotend? Printed on Bambu P1P, 0.4mm hotend, Polymaker Matte Sakura Pink, 230° filament, 70° bed, great adherence with Bambu Labs gluestick printing on silent until the first 10 layers went through and 30mm/s initial layer and 50mm/s infill. I slowed down my first layers and got what I thought was a great looking print. I removed one slug a minute after printing and even before separating I saw very small what I thought were dark spots. Then when slowly separating I realized that they were holes where the layers weren't thick enough. The second slug I waited a little bit to try and separate, though I still saw the small spots/holes. The slug too had the same issue. I'll try to size them up a but & print again. (Added pictures of them printing for those curious about how the slug prints in one piece.)
(Edited)
0
Reply
@CassLessThan3
I'm not sure what else to try changing. other prints aren't doing this, but I've tried the slugs now on 108%, 130% and 150%. 108% - both slugs had small crack/hole on same segment of shell and seemed really thin with a few very tiny roundish holes here and there. 130% one here pictured has just a couple of the very tiny holes, but no cracked shells. The other one spaghettied. 150% - both slugs spaghettied on me between 35-50% I've included a couple of th prints I've made before, in between and after the slugs. none of them have holes or spaghetti. I'm at a loss here. I used Bambu Labs PEI textured plate and Bambu Labs gluestick. Does this work better with a 0.2mm hotend? I only have a 0.4mm currently. Any suggestions would be appreciated. I'm hoping to print some slugs in different colours to help fill the Easter baskets for our family in a few weeks and have some egg hunt prizes and things that fit into eggs also. Thanks!
0
Reply
@MachMan
Print Profile
0.16mm layer, 3 walls, 10% infill
It printed fine, but it is very hard to break all the internal connections to make it flexible and it is easy for the segments to go out of alignment and you have to turn them around again. It looks cute, but as an articulated model I was a disappointed with it.
0
Reply
@user_2482780521
Print Profile
0.16mm layer, 3 walls, 10% infill
Cool, print many for the children to play with
Show original
0
Reply
@HenPen692
Print Profile
0.16mm layer, 3 walls, 10% infill
I love slugs and this one is amazing
0
Reply
@mrmichaeljrusse
Great model. Printed nice in Bambu Lab transparent PETG.
0
Reply
@ProtoNovice
Print Profile
0.16mm layer, 3 walls, 10% infill
Cute
0
Reply
@user_591288615
Print Profile
0.16mm layer, 3 walls, 10% infill
0
Reply
@user_2092031925
Print Profile
0.16mm layer, 3 walls, 10% infill
0
Reply

This remix is based on

Friendly Articulated Slug
Friendly Articulated Slug

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Flex Slug
Flex Slug
RStyle
10.8 k
2.5 k
Slug hotel (Death-trap)
Slug hotel (Death-trap)
Blondied
2.3 k
1.6 k
Metal Slug SV-001 合金弹头
Metal Slug SV-001
蟑螂恶霸3D
2 k
871
Axolotl slug
Axolotl slug
Gamesandtoys64
917
376