Spider Homecoming faceshell - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

andrepcg

Props & Cosplays>Masks & Helmets

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

13.7 h

4 plates

4.7(23)

Open in Bambu Studio

Boost

293

475

772

311

Released

Description

Split the model so it fits in the A1 mini. Then I fused the parts using an soldering iron

mask

helmet

faceshell

Comment & Rating (37)

@user_2135690130

Boosted

looks amazing 🤩

@user_1752255854

came out great

@user_3568985906

what did you use for fabric and where from

@Lccll93

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

@pencap

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print, came out really well!

@kenbrooks33

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice Print.

@user_160155507

Print Profile

0.2mm layer, 2 walls, 15% infill

Had to resize (as it is with all armour/helmet bases items) which was easy to do. However, the thickness of this face shell feels almost like a helmet, it is very thick, but it looks great. Also the magnet holes are very shallow so you may need to drill them out before you can glue in your magnets.

@gachupino

What size did you use

Show original

@Mag3dprintshop

does it fit people

@Adam.

Not me

@user_2867384384

Print Profile

0.2mm layer, 2 walls, 15% infill

Eye mesh does not want to go in cleanly since it is flat and the mask is curved. Was almost able to work around that with plenty of glue and holding in place. Ended up trashing them and replacing with some flexible mesh I had around. The eye liner part also does not go in clean. It is almost like it was sized a percent or two too small for the actual eye holes. It still works but is not as clean as it could be. I suggest connection points on the mask halves as well. May make things easier.