704胶嘴/704 Rubber nozzle

由于买胶附赠的胶嘴是一次性的，所以画了一个模型，不怕胶嘴不够。

1. 此胶嘴出口更小可精确控制出胶量
2. 内壁狭小，扔掉时内部残留胶水更少，减少浪费

适用于8mm左右的铝管硅橡胶，螺纹胶嘴

As the adhesive nozzle included in the purchase is disposable, a model was drawn, so there is no need to worry about insufficient adhesive nozzles.

1. This nozzle has a smaller outlet and can precisely control the amount of glue produced
2. The inner wall is narrow, resulting in less residual glue when discarded, reducing waste

Suitable for aluminum tube silicone rubber with a diameter of about 8mm, threaded rubber nozzle