Divider & Boxes for Stanley Organizer

Release the full potencial of your Stanley Organizer

As Stanley does not provide dividers of any kind for its drawers 

(something I still can't get my head around..) I designed 3 different versions fo fit the Small and Big drawers, 

together with different boxes to further increase functionality.

Divider

Choose between the following 3 options: 

- Small Divider (Standard height)

- Big Divider (Low & Standard height)

INFO: Each set for big drawers (consisting of 3 Dividers) 

1 Divider has a little cutout to match the injection-bump. See picture below.

------------------------------

Tired of having to scoop the entire drawer, 

only to get to that one screw at the very bottom you're unable to reach…?!: 

Drop-in boxes Newly Added!

Choose between the following 4 options: 

- 1 Box for each compartment

Horizontally divided Boxes without partition. 

Horizontally divided Boxes with partition (V2)

2 vertically divided Boxes for each compartment

INFO:

* All 3 compartments are sized differently and its therefore not possible to swap the Boxes around 

(front to back, middle to front/back or else) 

** As all Boxes are also chamfered (to fit the drawers perfectly) 

You can not interchange the Top & Bottom of the horizontally split Boxes.

*** All front / bottom Boxes have a cut-out at their bottom to prevent wobble 

(due to the Injection-mould-bumb at bottom.

Combine them however you wish!

------------------------------

If you like my design, I’d really appreciate your feedback!

Thx! 😊