Skid Blocks - Ridgid Miter Saw Stand

All Compatible Lightbox Frames & Mounts Available Here!
 

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues)         Magnets (for optional mounts)

Recommended LED Light Strips     Battery Powered LED Light Strips     Double Sided Tape for Lens: Optional

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

Do you own the Ridgid Folding Miter Saw Stand? Specifically model AC9946 (May fit other models and makes such as Bauer, Hercules, Delta, etc. 

If so, you know loading it and unloading it in the back of a pickup truck is fairly easy. However, the scratches it puts on the equipment are no good. I wanted to keep mine looking good for as long as possible.

I designed these blocks to clamp onto the handle so that when loading it slides on them instead of the handle.

Super simple and easy printout of PLA (PETG could be a good option as well). When they get worn down, just reprint another set and use the same hardware.

I recommend printing with a minimum of 4 walls and 50% gyroid infill. I might even try my next set at 100% infill to see if they last even longer.

Post-processing you will need:

4 = 6-32 x 1.75"

4 = 6-32 x .50" 

8 = 6-32 nuts. 

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.