Tesla Model 3 Center Console Tray (Modified from jonco223)
Print Profile(3)
Description
Summary
This is a center console tray (with coin tray) remix from jonco223's design. The original design is great but I just have some pet peeves that I needed to modify...
The following are the modifications:
Fix - The wall thickness below the coin tray is too thin for 0.4mm nozzle to print, I was getting a pin-hole in my original print.
Fix - The step-down from the top ledge is rubbing against the center console cover. I recessed it back 10mm. This problem will show up if you plan on flocking the tray - the rubbing will rub off the flocking fibers and the paint.
Mod - Added a partial opening in the front of the tray to allow cable or light to come thru from the bottom of the center console.
- Mod - Rounded out most of the straight edges in the tray as (and I'm still learning) sharp corners don't stick to flocking fibers too well.
Print Settings
Printer:
JGAurora A5
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
30%
Notes:
Very easy print, nothing to worry about.
License
Comment & Rating (64)