all the pieces seem to fit fine except for the end barrel piece. if it's fine actually within the recess and plug but when lining them up they are uneven. all other parts seem to be flush except for that last barrel piece

Bretthtml

Steve white

0.2mm layer, 2 walls, 15% infill

had a issue with the supports but otherwise it was fine

***12Hours*** Optimized supports - 0.2mm,2 walls,10% infill

came out perfect, everything lined up, downloaded and printed with no orientation change

Mike K

Sulli59

user_124371206

definitely printing this I am printing the awp right now

jabbaTheHuds

 Could you upload a print profile for the A1 mini?

3d print lover

printerman007

WIZZY

cover

IMG_3944_33d06dc3-e4d6-4d31-ad48-245443063508.jpeg

IMG_3945_998b86fd-e584-4d79-be86-7b951077576f.jpeg

IMG_3946_0bca65da-8ddb-4bed-bd77-971b3a195809.jpeg

IMG_3943_51215b57-ba3e-4b06-90f1-95a39286e7ef.webp

plate_1.webp

plate_1.png

IMG_9715_f1322da2-3185-42f7-94d6-ed3d734c17b4.webp

IMG_9726_237dfc8b-d3d7-482a-bc4e-68ca3aa4ce83.webp

Screenshot 2024-04-25 at 7.50.10 AM_542ceae5-d157-4583-92f5-36e34ba9fe3d.webp

Screenshot 2024-04-25 at 8.07.17 AM_29e305fb-1e7d-4e69-9025-e2b2e8f7ad29.webp

IMG_9824 2_2a9aaf28-eb32-4dd8-bd6f-66891253051b.webp

Victor

<ul><li>I manually painted all the seams, the original had a uggly seam right on the side of the gun. I placed all of them on the bottom.</li><li>I manually painted supports on all models, the auto tree placed a bunch of useless supports, they waste a lot of material and time, and make the model more prone to fail during print (the more tall supports you have they are more likely to knock over and cause thousand of retractions during print)</li><li>Carefully positioned models on buildplate, they were positioned so it would minimize travel between them saving time, and reducing artifacts and the likelyhood of material ozzing nocking over parts which is important for tall prints like this.</li></ul>This resulted in a total savings of almost 100grams of filament, and about 4 hours faster (6h if printed on sport mode like i did).&nbsp;I used Matte Black PLA and it handled sport mode, if you have high flow pla you might be able to print on ludicrous, although I haven't tested that, if you do let me know.

easy to print, 1 plate&nbsp;next update will be a sawed off version from this model&nbsp;check out my other models too

Remington Shotgun

发烧友大卫

Remington Shotgun A1mini

Global

Print Profile(2)

Description

Comment & Rating (24)

License

Remixes (1)

Remington Shotgun A1mini

Related Models

The Pump-Chump (Pump-Action Toy Blaster)

Remington Shotgun A1mini

12 Gauge Shell Holder/Saddle

Beer Shotgun Keychain