Search models, users, collections, and posts
Getter Robo - HueForge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.6 h
1 plate
Open in Bambu Studio
Boost
0
5
0
0
3
0
Released
Description
My first work of Hueforge with Getter Robo and old Cartoon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with BambuLab Green
At layer #7 (0.64mm) swap to Black
At layer #11 (0.96mm) swap to Jade White for the rest.
Boost Me (for free)
Help me to improve myself making better things for you :)
How about buy me a coffee
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)