Rugged Airpods Pro Case - Free 3D Print Model

Search models, users, collections, and posts

Jallim

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Both Parts, 0.2mm layer, 2 walls, 15% infill

Designer

39 min

1 plate

4.3(76)

Both Parts, A1 Mini, 0.2mm layer, 2 walls, 15% infill

53 min

1 plate

4.8(10)

0.2mm layer, 2 walls, 15% infill, By Object

1.6 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

200

364

1.4 k

995

Released

Description

Rugged case for Airpods Pro USB-C

Bottom part is friction fitted, top might need a strip of double sided tape to ensure hold.

Comment & Rating (96)

@Mad_DJ_

Print Profile

Both Parts, 0.2mm layer, 2 walls, 15% infill

will it protect your AirPods? yes. however, you need to find a tiny USB-C charger to fit into the charging hole. I tried 4 different cables (1 from Apple) and none of them fit. The case does allow for wireless charging which is what I do anyway. Also, don’t plan on removing your AirPods from the case after installing it. I had to use a heat gun and pry my finger in between the AirPods and the plastic in order to remove the AirPods case from the shell.

Other Issues:Charger hole too small, too tight of a fit.

@user_2585948094

will wireless charging work?

@anishdamaker

Print Profile

Both Parts, 0.2mm layer, 2 walls, 15% infill

top doesn’t fit

@Kellye8498

Print Profile

0.2mm layer, 2 walls, 15% infill, By Object

Defnitely would need Doyle sided tape to keep this on, even using TPU, which I did. This case is nice though and i feel like it’s going to protect my AirPods now that they are going to be put away since my new ones are coming. Thanks for sharing!

@MJB_1106900451

Print Profile

Both Parts, 0.2mm layer, 2 walls, 15% infill

Another successful print!

@cdonic

Boosted

Print Profile

Both Parts, 0.2mm layer, 2 walls, 15% infill

The print serves its function well. However, for my case, the top portion is ok but the bottom portion seems a little loose. there seems to be a slight layer shift, but I am not going to be too bothered about it and reprint.

@user_909073626

Print Profile

Both Parts, 0.2mm layer, 2 walls, 15% infill

it fits perfectly, a small hole for the led will be appreciated

@gth_tank

Boosted

Print Profile

Both Parts, 0.2mm layer, 2 walls, 15% infill

thank you nice design

@KUNAR

Print Profile

Both Parts, 0.2mm layer, 2 walls, 15% infill

i’ve printed multiple versions of this for friends now really love the design unfortunately had a slight layer shift not to noticeable, but I will be re-printing because it’ll drive my OCD crazy definitely recommend the case double-sided 3M tape works great to keep the lid on