Clothesline holder for RV
Print Profile(3)
Description
Membership
You like my models and you are interested in a Commercial Printing Licence or you want to support me on a long term base. Please check my membership program.
English
Boost Me (for free)
If you like this model, please support me with a boost. Thanks!
3 meter of clotheline
This is a mount for a clothline holder, that can be used in a Fiat Ducato, Citroen Jumper, Peugeot Boxer, RAM Promaster, some VW crafter, Mercedes Benz Sprinter and other transporters sliding door rails.
You can use any clothline holder similar to the Vileda Express radiator clothline.
Each part must be printed twice to get a full set.
Update 2020-12-12
For those who have a problem with their filament while printing thin walls, the plug Big-Bumper-V4.stl should be used instead of Big-Bumper-V2.stl or Big-Bumper-V2a.stl.
The Big-Bumper-V2-TPU-Part.stl will fit Big-Bumper-V4.stl,too.
( Update 2024-04-18: This Parts are no longer included in this project! )
Update 2021-07-20
We have made a small change to Trockner-V3c.stl already earlier this year an tested it with a VW Crafter RV and some Mercedes Benz Sprinter. It works too.
Update 2024-06-15
We have made a new TPU CONE V6. Due to the powder coating you may have to adjust the size of the cone. Reduce the size to 98,3% or 96,5% to get a tight fitting.
German
3 Meters Clotheline
This is a mount for a clotheline holder of type Vileda Express, which can be used in the sliding door rails of a Fiat Ducato, Citroen Jumper, Peugeot Boxer, RAM Promaster, some VW Crafter, Mercedes Benz Sprinter and other transporters.
You can use any clotheline holder that resembles the Vileda Express radiator clotheline Each part must be printed twice to get a complete set.
Update 12.12.2020
Anyone who has a problem with their filament when printing thin walls should use the Big-Bumper-V4.stl plug instead of Big-Bumper-V2.stl or Big-Bumper-V2a.stl The Big-Bumper-V2-TPU-Part.stl also fits Big-Bumper-V4.stl (Update 04.18.2024: These parts are no longer included in this project!)
Update 20.07.2021
We already made a small change to Trockner-V3c.stl earlier this year and tested it with a VW Crafter RV and some Mercedes Benz Sprinter The suspension now also works here.
Update 15.06.2024
We have designed and added a TPU CONE V6 For better hold, the size of the cone may have to be adjusted to 98.3% or 96.5% depending on the thickness of the powder coating.
| Product | Compatible | Annotation | Average Price |
|---|---|---|---|
| Germany & Europe | |||
| Vileda Express | YES | Still the best choice! | 6 - 13 € |
| Vileda Sunset 100 Balcony Dryer | NO |
| |
| Gimi Airy Clothes Dryer | YES | Tested twice in 2020 and 2023 | 4 - 12 € |
| SIDCO Radiator Clothes Dryer | YES | Tested in 2020 | 11 - 14 € |
| Stimo Drying Rack | NO | Tested in 2023 | 11 - 14 € |
| Relaxdays Hanging Dryer | YES | Tested twice in 2020 and 2021 ( 4 Meters! ) | 6 - 19 € |
| Relaxdays Hanging Dryer 4,80m | YES | Tested by User in 2020 and 2021. Please note the width of the laundry rack! | 16 -25 € |
| USA & Canada | |||
| Gimi Radio Radiator Clothes Dryer | YES | Tested by User in 2024. | 9-14 USD |
| Candumy Portable Clothes Drying Rack | NO | *2 | 23-28 USD |
Home Basics Clothes Drying Rack (Amazon USA) Home Basic Clothes Drying Rack (Amazon Canada) | YES *1 | Tested by User in 2025. | 23-28 USD
|
| Mumisuto Clothes Drying Rack | YES *1 | Not tested yet, but looks good to me *2 | 21-30 USD |
| PerGar Store Drying Rack | YES *1 | Not tested yet, but looks good to me *2 | 13-20 USD |
| Fox Valley Traders Store Drying Rack | YES *1 | Not tested yet, but looks good to me *2 | 18-25 USD |
- Please note that I have not tested this laundry rack myself and assume no liability for its 100% compatibility. Should the rack prove to be incompatible, please let me know.
- Special thanks to user @binarysecurity for sharing these links with us.
Assembly Instructions
| Remove the original end caps from the frame. |  |
| Assemble cone and TPU cover together. |  |
Push the cones onto the pipes.
Attention:Due to the powder coating, the cones may not fit! Do not use too much force. The cones can burst! |  |
Put the upper part of cone in boiling water for about one to two minutes. Then take it out of the water and press it onto the pipes.
|  |
| Now the cones should fit on to the pipes. |  |
| Licence Information: | |
English
In addition to the Creative Commons - Attribution - Non-Commercial - No Derivatives license, the following legal provisions apply.
This model is for private use only!
For those who don't understand the point of this license: It is strictly forbidden to offer this product for sale in the original, as 3D-print or as a replica in any form on sales platforms such as eBay, Etsy or other platforms, even privat shops.
The model is for private and non-commercial use only!
Violations will be prosecuted!
By downloading the model, this point is accepted as read and understood!
If you are interested in a reseller license, please contact me. | German
In addition to the Creative Commons – Attribution – Non-Commercial – No Derivatives license, the following legal provisions apply.
This model is for private use only!
For those who do not understand the idea behind this license: It is strictly forbidden to offer this product for sale in its original form, as a 3D print or as a replica in any form on sales platforms such as eBay, Etsy or other platforms (including private shops).
The model is for private and non-commercial use only!
Violations will be prosecuted.
By downloading the model, this point is accepted as read and understood! If you are interested in a reseller license, please contact me. |
© Suny66 (BCS)
License
Comment & Rating (52)