RTX4070 FAN MOD rtx4070公版风扇框mod typeX

A mod of the RTX4070 founder's edition's Fan which is cheap but high quality you can buy.this will help you to apply it on chassis or a heatsink This is a free open source mod for All Diyers,you can download the file and 3D print it.

For users: You're expected to prepare these items listed below to finish assembling

4* m2 screw (length 2.5mm or 3mm),mount fan to the shround

4* m3 or m3.5 screw(length~20mm) for mount on chassis or radiator

defination of the FPC pins: face to the pin side,upward,THEY ARE +12V,+12V,PWM,GND,FG,GND. connect one pare of the +12v and GND and it is good to go

UPDATED 4th. July 2024

Optimized application for Thermal right AXP90 series heatsink.(File:4070bx_axp90.step and 4070_axp90.3mf)

@me if for commercial usage.

中文

RTX4070风扇MOD适配模型 type X

安装须知

m2平头螺丝，长度2.5-3mm,将风扇固定到框架上

m3螺丝，长度18mm左右，用于风扇与机箱的固定

FPC针脚定义：面对金手指，排线指向上方，依次是 +12V,+12V,PWM脉冲调速信号，接地，测速线，接地

更新说明（2024.07.04）

优化了风扇用于利民AXP90散热器的安装，避开了铁丝折弯 （请使用以下文件打印：4070bx_axp90.step and 4070_axp90.3mf)

商用请注明作者