JEEP Wrangler - 52 part fully printable - Free 3D Print Model

Search models, users, collections, and posts

soarpix

Hobby & DIY>Vehicles

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

9.6 h

5 plates

4.9(55)

Open in Bambu Studio

Boost

603

1032

789

356

Released

Description

Note: This design is for personal use only.

JEEP Wrangler - 52 part fully printable

Fully printable model kit
Spinning wheels
This model does not need any additional non-3dprinted parts
The design is divided in many different parts in order to allow printing different parts with different color

The body, vinsch and rearview mirrors was printed with bed support.
Everything else was printed without support.

5mm steel axle L=80mm or use the printable one

HAPPY PRINTING!

Click here to watch the video =) https://youtu.be/yHEh-oRqgo0

Comment & Rating (82)

@user_957442637

Boosted

Very high quality design and easy to print. The look is very good. My grand sons were very happy with it. The parts are loose enough to allow an easy placement during the assembly. The axles were a little loose in the wheel drum so the axle wasn't perpendicular to the road by default. It's really small detail and I just had to to pay attention to maintain it straight up while the glue was setting. The way you organized the parts on the beds is really good, because it minimize the number of beds and makes things simple to print. However, I took the liberty to add some beds and diversify the colors. I even printed the tires with TPU and the look and feel is really great. This is one of the best design that I printed so far. Thank you very much for sharing it.

The designer has replied

@soarpix

Thanks for the boost! Pictures look great! =)

@user_957442637

Boosted

Replying to @soarpix :

The success the jeep had with my grand sons was too much to handle... 8-) The 3 kids were fighting for the jeep so I had to print 3 of them, each kid chose his jeep's color and I didn't take any chance. I printed a license plate with the owner name on it. ;-)

@TeresaB

Printed at 130%, 0.2mm layers and 2 Walls High quality design and i had so much fun printing and assembling. Next up: ALL the tooned cars! These designs are amazing!

@shrinermac

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great Print!!!! I did modify the top of the body to make it a pen holder for my desk at work. (PLA Matte Dark Green, PLA Matte Ivory White, PLA Matte Scarlet Red, PLA Basic Black) Excuse the broken mirror I have to re-print one.

The profile uploader has replied

@soarpix

Thanks for the boost! =)

@user_1930155542

Boosted

Great print and fit of parts!

The designer has replied

@soarpix

Thanks for the boost!

@Mirco87

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect!!!!! next time I'll print 60% bigger!

The profile uploader has replied

@soarpix

Thanks for the boost! =)

@Elykn67

Scaled up to match the size of the pen holder version. borrowed some parts from other designs.

@Skizzofpv

Print Profile

0.2mm layer, 2 walls, 15% infill

ottimo

@EnchantedCheese

Print Profile

0.2mm layer, 2 walls, 15% infill

Turned out awesome!

@terranova

Thank you for the model I had it printed flawlessly with PLA and A1

(Edited)

The designer has replied

Show original

@soarpix

You posted on the wrong model =)

@samijel

Print Profile

0.2mm layer, 2 walls, 15% infill

Thank you very much and it worked great

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.