Cute Christmas tree with shoes - Free 3D Print Model

Search models, users, collections, and posts

PrintThatBoii

Art>Other Art Models

IP Report

Print Profile(8)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

X1 / P1 - AMS needed. 1 Plate 2 separate printed colors, 0.2mm

1.5 h

1 plate

4.8(66)

A1 with AMS - 1 plate, 2 separate printed colors, 0.2 mm

1.7 h

1 plate

4.9(34)

A1 - 2 plates, 2 Colors 0.2mm layer

1.9 h

2 plates

4.9(30)

0.12 Finetree+shoes

3.1 h

1 plate

5.0(5)

Click to see more

Open in Bambu Studio

Boost

895

1855

233

2.2 k

1.7 k

Released

Description

This is a scalable Christmas tree with shoes because everything is better with some shoes and a face XD. The first tree is at scale 75% the middle is at 100% and the right one is at 50%. You can go bigger if you want.

note that the smaller you go the harder it is to get the shoes in. At the scale of 50% you have to push a bit harder than the one on 100%.

3D PRINTING:

You can print this with a layer height of 0.2 (for the 50% tree and the shoes) or 0.3mm. You don’t need supports.
I would recommend dropping the shoes 1mm lower in the slicer as the shoes are a bit too round in the front. I printed them with 15-20% infill (trees and shoes).

If you read this in December, Happy Christmas!

I borrowed the shoes from @FatherLicorice and his cute little ghosts.