Hanging Storage Bins

03.07.2024 Update

• Added Hanging Rail Bars for Multiboard. I recommend to use a Weight Bearing Snaps when you attach rails to the Multiboard
• Added two separate Print Profiles. One for A1 mini and one for all BambuLab larger printers 

This is addition project to my previous one of small Storage Box:
https://makerworld.com/en/models/39119

Ok so here are Medium and Large Sized versions of first one. Little bit tweaked and as I think - a bit improved as well. I'm calling them as Medium and Large evnns if they are not very large. But I think make them larger are not really productive. Basic sizing of those Bins are given in PDF file I have given here. As in first model, I'm giving 2 versions of Bins.

1. Solid one piece, where you will need to use some supports printing and,
2. Supportless version where Bin is splitted in 2 pieces and You will need to use a bit of glue. Or maybe not, you will see. I found this version holds together quite good even without glue. However I didn't designed them that way so it's up to you.

For them Bins here are hanger rails made to be used on HSW Honeycomb Storage wall as well as for any other surface where you can crew them on. It can be a bit confusing at first as there are many of them , but actually it is quite easy. So there are:

1. Four different MiniRail ones. They are to be used on Small Box from first project and Medium Bin Here. Difference between four of them is just different length and fittings (Hex for Honeycomb wall and Screw for Honeycomwal screw fittings and any other surface you may want)
2. Four RailLargeBox ones to be used for Large Bins and the same rest of differences).

Oh Yes … You can Buy me a coffee if You feel good doing so :) (And very big Thank You For interest in my work)
https://www.buymeacoffee.com/warlogh