xlr8434

cover

Screenshot 2023-10-16 144900.png

Screenshot 2023-10-16 144913.png

IMG_4161.JPG

IMG_4160.JPG

plate_1.png

IMG_4159.webp

plate_1.webp

IMG_4161.webp

IMG_4160.webp

Screenshot 2023-10-16 144913.webp

Screenshot 2023-10-16 144900.webp

<ul><li>print without supports</li><li>uncheck uniform scale, set size values to: x-105, y-105, z-68 mm</li><li>it might be thin and break so i would recommend increasing the wall count for better strength if needed.</li></ul>

0.2mm layer, 2 walls, 15% infill

IMG_2213.png

IMG_2214.png

IMG_2215.png

Added a couple of screw holes and some reinforcement around one of the holes.&nbsp;&nbsp;Profile was created for and printed on the A1 Mini.&nbsp;

With screw holes - 0.2mm layer, 2 walls, 15% infill

Wanted something i could mount to the wall and still be able to take the eero 6+ off easily. MAKE SURE THE SCALE FACTOR IS THE SAME AS IN PICTURE OTHERWISE IT WILL BE HUGE.

eero 6+ mount

MAvE_AU

IMG_5764.jpeg

eero 7+ mount

DolfoMan

tempImagelD0ld8.jpg

Screenshot 2025-01-11 at 1.51.11 PM.png

Eero 6+ Command Strip mount

ASIA

Print Profile(2)

Description

Comment & Rating (86)

License

Remixes (3)

Related Models