Ocarina of Time - 12 hole Alto C Ocarina - Free 3D Print Model

Search models, users, collections, and posts

E.CAN3

Hobby & DIY>Music

IP Report

Print Profile(6)

All

A1 mini

P1S

X1E

X1 Carbon

H2D Pro

P1P

H2S

H2D

P2S

H2C

X2D

A2L

Hidden Seam + Super Smooth

3.9 h

2 plates

4.9(167)

0.16mm layer, 2 walls, 15% infill

2.9 h

2 plates

4.8(478)

Designer settings

2.7 h

2 plates

4.8(122)

0.16mm layer, 2 walls, 15% infill

2.5 h

2 plates

4.8(64)

Click to see more

Open in Bambu Studio

Boost

1978

4963

1073

622

9.1 k

6.8 k

Released

Description

This is my version of the Ocarina of Time in Alto C .

How does it sound?

Thanks to Denis Kovalev for making this video.

The Ocarina

It is designed to be printed.

The internal design helps to reduce airy high notes( Better sound, no Acute Bend).

It is tuned: A4 up to F6

Standard 12-hole fingering

All holes closed for A4, all holes open for F6

For A4 the required air pressure is low , more opened holes need more air pressure to hit the note.

I print them with:

0.4 mm nozzle
2 walls
0.2 mm Layer height
4 Top and Bottom layers
Wall Ordering: Outside To Inside - Walls before Infill.
20% Infill - Gyroid
5mm Brim
No Support
Orientation on the moutpiece

Glue the Triforce

The Position of the Triforce when the mouthpiece is pointing upwards:

U: upper segment

R: right segment

L: left

Boost Me (for free)

You want to support my work? Every Boost helps.
You want more? Feel free to follow me :)

Membership

Join the commercial membership to sell physical prints of this model.

Join

Visit my Profile for more

Comment & Rating (1073)

@Nduanetesh

Boosted

I've printed several of the ocarinas available on Maker World, and this is easily the best one. It's the only I've found so far in which all of the notes sound without advanced tricks like extreme breath control or a very exaggerated acute bend. the lowest notes are a bit tricky to get in tune, but that's the case for nearly all ocarinas. The high notes blow easily and cleanly and that's the biggest accomplishment of this instrument. Have you thought about designing a double ocarina? That would be incredible! I'm an experienced player and would be happy to help with prototyping and development. Thanks for this great model.

The designer has replied

@E.CAN3

Sure, I thought about it. But at the moment I am working on another Alto C, and after that I want to make a bass C. I don't want to promise anything. So yeah, it is on my list of things I could make.

@DirtyPaws

Boosted

The comment I needed to read while rummaging through all the ocarinas trying to figure out which is best. Thankee for ya service and past filament friend. I’m going to go ahead and give this print a shot.

@Benyo1992

Replying to @E.CAN3 :

Hi, im from Puerto Rico and don't even own a 3d printer. I just made an account to write this comment and hope you make a 2 chamber one soon. Me and a friend are waiting eagerly. Excellent work bro

@Suiika

Print Profile

Hidden Seam + Super Smooth

Impresionante

The profile uploader has replied

@tachyon_tamer

Boosted

Thank you very much for sharing I'm glad you like it I spent a lot of time creating the most perfect printing profile possible I like the base could you share the link Thanks!! Your Ocarina looks like a museum piece!! 👏👏👏

Show original

@Suiika

Replying to @tachyon_tamer :

Thank you very much! I got the base from here: https://makerworld.com/es/models/1225204-12-hole-ocarina-stand#profileId-1242774

(Edited)

Show original

@tachyon_tamer

Boosted

Replying to @Suiika :

Awesome thanks for sharing! Good to know that base also works even if it's for a different ocarina

Show original

@NotThatCat

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

honestly surprised that it printed so well on the A1 mini, super awesome print!

@NotHank

Boosted

Print Profile

Designer settings

Printed perfectly at 50% speed on my A1 mini! Sounds awesome, can't wait to learn to play it.

@SuperYeep

@NotHank did you use supports?

(Edited)

@user_3468119031

Print Profile

Hidden Seam + Super Smooth

all in all mega!! for some reason the end didn't work out for me 🤷‍♂️ the 2nd attempt worked including the end :)

(Edited)

The profile uploader has replied

Show original

@tachyon_tamer

Boosted

Have you calibrated that filament? Which is your K value? Also may be because your printer is the A1 mini you need to increase the brim

@user_3468119031

Hi, thanks for the message :) I've only had my A1 mini for 2 weeks and have only been dealing with 3D printing since then. So I'm still a beginner in this field. The filament was BambuLab PLA Translucent blue and I set it accordingly as the material used during printing. So it should be fine. The rest of it is printed cleanly too. I can't say anything about the K-value, that's automatically set during the dynamic flow calibration, I thought. And what do you mean by "increase of the brim"? Best regards, Martin

Show original

@tachyon_tamer

Boosted

Replying to @user_3468119031 :

Congrats for your new printer then!! For many filaments you need to calibrate even the ones from BambuLab. I had a lot of problems with their PLA Matte I changed a lot of settings to get smooth results. I haven't tried their Translucent PLA but I suggest you check how to calibrate filament so you can obtain the best possible results and prints. Also be sure to keep your filament dried and away from humid areas otherwise you can have many problems with it. Best Regards!!

@BeefChunks

Print Profile

Hidden Seam + Super Smooth

I made a kids ocarina for Christmas for my grandkids along with my son and wife. Mu son mentioned the one from Zelda.....the next morning, I surprised him with this. It came out looking awesome!!! He loves it!! Thank you! It came out so nice I might just print one for myself.

The profile uploader has replied

@tachyon_tamer

Boosted

Awesome print!! I'm really glad you like it, it took me a lot of time to achieve the best settings for that smooth surface. By the way I don't know if you already glued them but the yellow triangles are upside down, the letters should look down and the smooth surface up.

(Edited)

@BeefChunks

Replying to @tachyon_tamer :

It was worth it my friend! It looks awesome!!

(Edited)

@BeefChunks

Replying to @tachyon_tamer :

they weren't glued in the.pic i just set them there for the Pic. I let my son glue them and he mentioned the same thing.

(Edited)

@tachyon_tamer

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Beautiful and can be played!!

(Edited)

@E.CAN3

Nice print quality! I think this is the best I have seen so far, of this ocarina. I also like how you promote your design :) Why not? ;)

(Edited)

@tachyon_tamer

Boosted

Replying to @E.CAN3 :

Hi there friend! Just saw your comment I didn't know you replied :'( I did some modifications to the print profile so it can be printed with a super smooth surface and hidden seam, I uploaded it so you can use it. My other ocarina is nice but is a remix of and old Thingiverse design I wish it was mine, it looks nice and sounds good but the holes are huge only may be for L-XL size hands haha