Multiboard Broom Holder - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Hantra

Tools>Organizers

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 25% infill

Designer

1.7 h

1 plate

4.6(28)

Open in Bambu Studio

Boost

226

806

764

349

Released

Description

This is a multiboard capable re-mix of the broom holder here: https://makerworld.com/en/models/95207?from=search#profileId-104523

Just screw right into the multiboard and hang any tool with broom handles. Will fit in the 8mm offset Multiboard no problem.

Comment & Rating (36)

@moritzw

i used the step file which differs from your images, what mounts does it need? the recessed holes are smaller than the screw-in MultiConnects by DavidD i typically use for mounting https://www.printables.com/de/model/716558-multiconnect-general-connector-for-your-board/files

(Edited)

The designer has replied

@Riley

Just screw the threads right into the multiword. No mounts needed.

@moritzw

Replying to @Riley :

there is no thread in your step file. look at my photo.

@Riley

Replying to @moritzw :

That is strange. Try the 3mf. Maybe the step didn't bring it over?

@captainhagbard

Print Profile

0.2mm layer, 3 walls, 25% infill

works good

@iPrintThere4iAm

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

printed perfect and works great! thank you for this very useful model 👍🏻👍🏻👍🏻👍🏻

@BlurryReptile

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

Seems to hold up well.

@markome

Print Profile

0.2mm layer, 3 walls, 25% infill

Its quarter turn too loose. Would be better with snaps.

@user_2060344945

Print Profile

0.2mm layer, 3 walls, 25% infill

broom always slipping down so i put a elastic in midle of gear and now it works

@user_534408787

Print Profile

0.2mm layer, 3 walls, 25% infill

fulfills its function

Show original

@user_928255873

Print Profile

0.2mm layer, 3 walls, 25% infill

worked perfect

(Edited)

@spikeon

Print Profile

0.2mm layer, 3 walls, 25% infill

brim made this really tight when assembled, to the point where it doesn’t function as intended and I will need to get the sandpaper out to fix it. i would’ve preferred no brim.