Magnetic Chisel Tip Guard/Protector, various sizes
Print Profile(1)
Description
Boost Me (for free)
If you found this model useful, consider boosting me to help support future projects!
Inspired from Lee Valley's Magnetic Chisel Guard (09A0226), which only comes in a few sizes and is metallic, I've decided to create my own chisel tip guards.
I find that most friction fit tip guards loosen overtime, as it gets used and stretches out. This is a perfect opportunity to use a small magnet to hold it in place. Works great when hang on the wall.
Requires:
- 6x3mm magnets
Print Settings:
- 0.4mm nozzel
- 2 perimeter
- 10% in fill
- PETG preferred, since it's slightly softer. I'm sure TPU works too, but I didn't try it.
The magnets simply press fits into place (hole size 6.1mm diameter). Adjust print size if your magnets are slightly over or undersized, taking into account of the print's shrinkage. Use a dab of superglue if you want to. For me the 0.1mm oversize comes out as a snug friction fit on Bambu X1C with PETG filament.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (16)