Adjustable Drip Waterer PET-Bottle

If you liked this model check out my other ones. Also follow me to keep updated when I post new models, which  I do regularly.

Update 24/4 - 2024: I have updated the print profile the that the small thread on the top should print more easily.

A drip waterer using a standard PET-bottle as water reservoir. The amount of watering can be altered by turning the knob.

We've all seen the PET-bottle plant waterer's. However, this one is adjustable for the current needs of the plant instead of just keeping the entire soil wet at all times. With a small threaded knob on the side of the device the amount of water dripping out of the device can be controlled and also aimed directly at the plant so that no water is wasted, hence it will last longer between refills and work even for plants that like dry spoil, like cactuses.

Assembly and usage:

1. Insert the part called tap (small part with 3 connections) into the part called base (large part), this will take some force but is necessary for a tight seal. Look at the pictures if needed.
2. Take the pin (the small pointy thingy) and screw it on the tap.
3. Fill up a water bottle and attach your new print to it.
4. Stick the large pointy thing straight down into the soil and make sure it doesn't fall over by itself.
5. Turn the small knob until the desired amount of water drips out of the tap.

Check out my other models if you liked this model, how about hydroponic growing baskets?

https://makerworld.com/en/models/424718#profileId-328151

Please drop a like and don't forget to upload your makes!

Update 17/4 - 2024: Added step files on the request of s.tochahi.