3D Maker Noob

cover

P1899383_6d9b16c7-db25-4517-bde8-f41cbafd7890.jpg

P1899387_5abcb981-4562-49a5-be7c-b2b80f002c53.jpg

P1899389_fab81fdf-3dc6-4747-b515-ef6b78a27a68.jpg

plate_1.png

P1899389_8b8d93bf-0207-4c1b-9d60-0d3e783678f1.webp

This profile includes accurate seam position in order not to affect the tolerance portions of the model. It also has no brim&nbsp;&nbsp;0.2 mm Layer height2 walls10% Cross Hatch Infill

0.2mm layer, 2 walls, 10% infill

P1899387_9b3ea5b6-39d1-4e1c-9ed0-065256b62902.webp

This profile includes accurate seam position in order not to affect the tolerance portions of the model. It also has no brim and painted for multicolor. It also includes a reduced size purge tower.&nbsp;0.2 mm Layer height2 walls10% Cross Hatch Infill

0.2mm layer, 2 walls, 10%  Cross Hatch Infill, Multicolor

PrintWorks

IMG_3837_91af9fc4-ab66-4f72-af9c-cc831bd108b8.webp

0.2mm layer, 2 walls, 15% infill

Superm3

IMG_4318_923d9de0-a18b-4717-a0b8-3b27dbe1cb79.webp

Using an A1 mini with slower speeds, I was able to fully clear each gap. The 0.1mm gap was semi-stuck but with a little bit of persuasion, it freed up. Glad to know that this printer is able to clear this test.

Slower print, 0.16mm layer, 2 walls, 15% infill, A1m

Bamboozled Bag

IMG_1774.jpeg

A profile for PETG that uses 10.4g of filament.

PETG HF Profile | 10% Gyroid Infill

Inpired by Maker&#39;s Muse&#39;s tollerance tests, this is a smaller version to test your printer clearance capabilities

Print Profile(5)

Description

Comment & Rating (1036)

License

Remixes (1)

Related Models

Clearance tolerance test