Air conditioning power engine CoolerEngine - Free 3D Print Model

Search models, users, collections, and posts

NLZBB

Hobby & DIY>Vehicles

IP Report

GIF

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

56 min

1 plate

4.7(59)

0.2mm layer, 3 walls, 15% infill

1.1 h

1 plate

5.0(6)

PETG 0.2mm layer, 3 walls, 15% infill

1.3 h

1 plate

5.0(5)

Adjusting parameters for quick read printing

53 min

1 plate

5.0(2)

Click to see more

Open in Bambu Studio

Boost

641

931

104

1.7 k

713

Released

Description

Content has been automatically translated.

Show original

Hello, if you plan on downloading this model, please consider leaving a like, posting a make, leaving a review, or even a donation. Thank You!

Hi There, if you plan on downloading this model please consider leaving a like, posting a make, leaving a review, or even a donation. Thank You!

When I designed this product, I built around the core idea that there is no support, no support, no support! That's right, you can print this model perfectly without adding support at all. Due to the lack of bearing structure, I used a ring fan blade design, which I believe is the most efficient way to utilize the wind flowing across the fan blade surface. I can perfectly install this fan on my car, you need to insert the buckle on the air conditioner outlet, there are two diameters, 3mm and 2mm, if these two diameters cannot fix the fan, then you can use TPU to print the "buckle" part. The entire model assembly is based on threads, and I have strictly calculated the tolerances during the design, so it can fit together perfectly without any dimensional adjustment! (If your printed model doesn't fit, it may be due to individual differences between different printers.)

When I designed this product, I built around the core idea that there is no support, no support, no support! That's right, you can print this model perfectly without adding support at all. Since there is no bearing structure, I used a ring fan blade design, which I thought would make the most efficient use of the wind flowing through the fan blade surface. I can install this fan perfectly on my car, you need to insert the buckle on the air conditioner outlet, there are two diameters, 3mm and 2mm, if these two diameters can't fix the fan, then you can use TPU to print the "buckle" part. The whole model assembly is based on threads, and I have calculated the tolerances strictly when designing, so it can fit together very perfectly without any dimensional adjustment! (If your printed model doesn't fit, it may be due to individual differences between different printers.)