The Bardificer

cover

plate_1.png

20240410_092822_ba7d45d4-fa9b-409c-9315-be59218ae9e1.webp

20240410_092822_1ec220b3-cfdf-4fd5-bc4e-b7d7b91e041b.webp

! THIS PROFILE REQUIRES A 0.2MM NOZZLE&nbsp;Read the above text if it hasn't caught your eye already.With that out of the way, here's the higher resolution profile. For great success, (insert Borat doing his thumbs-up here) leave all settings as is aside from filament stuff. We might not be using the same filaments, so go ahead and do what you need to there. This should be a point and click type of ordeal, even from a tiny glowing screen. Just hit print and let your Bambu work its magic. If you have a .2 nozzle, you already know, unless this is your first print with one, which in that case, hold onto your butt because you're about to have your mind blown. ;]

0.2mm nozzle, 0.025mm layer, 3 walls, 100% infill

20240410_092822_201d9256-efb4-4dd5-b64e-b202e29adea8.webp

20240410_092822_bf20c656-6848-4622-84f0-9b7fda946c82.webp

This model prints using the standard 0.4mm BBL nozzle.BBL P1SELEGOO Grey PLA+BBL High Temp Plate&nbsp;For best results, leave the profile as is and DO NOT adjust settings in the slicer. I spent a not insignificant while messing about with different print speeds/temps/infill %/model orientations, and found a sweet spot for these printers to really bring out the detail while keeping support removal to an absolute minimum.

0.04mm layer, 3 walls, 100% infill

Satyr

This is a model that I found on thingiverse and adapted to better suit FDM printing. Mainly adding this for a friend, but feel free to use Yggi any way you want. I do not own the rights to this model. The original, by mz4250, can be found here.<a target="_blank" href="https://www.thingiverse.com/thing:1045335" rel="nofollow noopener">https://www.thingiverse.com/thing:1045335</a>&nbsp;Anywho, enjoy!

Ygg'Nathio - Satyr Bard

ASIA

Print Profile(2)

Description

Comment & Rating (7)

This remix is based on

License

Related Models