Fuwamoco Twins Choker - Free 3D Print Model

Search models, users, collections, and posts

Ace Gamer

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(3)

All

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill, 10mm Brim

Designer

2.2 h

2 plates

0.2mm layer, 2 walls, 15% infill, 10mm Brim

Designer

2.3 h

2 plates

0.2mm layer, 2 walls, 15% infill, 10mm Brim

Designer

2.1 h

2 plates

Open in Bambu Studio

Boost

Released

Description

Bau Bau!

“Not Tommorrow, Toady!!!” - Mococo

I recently watched the debut and opening weeks of the new Hololive English's Generation Advent and really wanted to make the choker the Fuwamoco Twins wear!

This model might seem difficult to print but with specific orientations and brims it should print with minimal or no supports!

P.S. The spikes can be printed or omitted. I normally dislike printing smaller parts because they often break off the bed or look bad but I felt the design lacked something without them!

P.P.S. I used a small line of trim I had lying around for the choker band, you could attach it to an actual dog collar if you are doing a full cosplay.

If you want to know more about the design process I will be posting a video to my YouTube channel after all my most recent files are finished.

Link here: https://youtube.com/@aceganghub

If you have any suggestions please leave a comment or post your make!

Fuwamoco Twins: https://www.youtube.com/@FUWAMOCOch