Nespresso Original capsule organizer - Free 3D Print Model

Search models, users, collections, and posts

3D pr.nt

Household>Other House Models

IP Report

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

5.5 h

2 plates

4.9(57)

0.2mm layer, 2 walls, 15% infill

5 h

3 plates

5.0(27)

Aditional name tags

1 h

1 plate

5.0(1)

Single 7-Row Piece For H2 Series

4.1 h

1 plate

5.0(1)

Click to see more

Open in Bambu Studio

Boost

507

1507

102

1.7 k

848

Released

Description

Boost Me (for free)

if you enjoyed this model and want to encourage me to come up with more original and innovative designs please consider boosting this model. Thank you!

Organizer for Nespresso Original capsules under the shelf. Suitable for shelves with a depth of 280 mm. If a different length is needed, please contact me via message. The model is divided into two parts that fit together precisely and there is no need for any adhesive. One row holds 7 capsules, totaling 35 capsules.

Print settings:

PLA / PLA+
5% - 15% infill
0,20 mm layer
outer brim

Nespresso

nespresso capsule

nespresso capsule holder

organizer

capsule

coffe

Comment & Rating (102)

@colorfox

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print! The only downside (in my case) is that the shelve on which it hangs is a lot deeper than the design. I can't hang it all the way against the back wall, because then it would be too far in the cupboard. Since the design has no back stopper, the cups just fall off the back if I push it a bit too far by accident. It would be great if an optional back stopper could be printed for such occasions.

The profile uploader has replied

@MPsychZ

Boosted

Hello! Following your feedback and kind comments, I've created a version of the design that includes a back stopper. It's already available to download and print now! Thanks again for the compliments and for the excellent suggestion!

(Edited)

@colorfox

Boosted

Replying to @MPsychZ :

You are phenomenal! I'm going to print it right away. Thanks so much for your efforts!!

@Mira

Boosted

Beautiful. I don't drink coffee myself, but my wife drinks it often and she likes it, and that is most important. Thank you very much for the model. Now I won't have to clean up those damn capsules all over the kitchen :D Tip for others: If you want to extend or shorten the holder, you can scale the model in the Y dimension in the slicer. Just make sure you scale the object without the connecting teeth. This can be done by first slicing the model, scaling only the linear groove, and then connecting the parts together. All this can be done in Bambu Slicer. You can also add or remove rails for even more or fewer (duh?) capsules. Printed in Bambu PLA marble white, 3 walls, 15 infill gyroid. And fixed with double side duck tape.

(Edited)

@user_2345468096

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Super useful print, able to store the pods out of sight but within easy reach. Used command strips to stick to the cupboard. Much prefer this type of holder compared to table top versions that take up space.

@Shadow972

Print Profile

0.2mm layer, 2 walls, 15% infill

I only printed the main part which was enough for my furniture, more or less 230mm deep. Perfect

Show original

@AgentLino

I had to improvise a bit since I have under cabinet lighting. It turned out great with a little creativity and some command strips! Tbe gravity feeds helps too! I made do a reprint with an edge to the bottom and to the sides, in particular, to hide the command strips. Thanks again!⭐️⭐️⭐️⭐️⭐️

@user_3193054438

Print Profile

0.2mm layer, 2 walls, 15% infill

Petg printed, awesome

@Tarzan_3D

I printed it twice and placed them side by side so that I have a total of 50 capsules. Thank you very much!

Show original

@PuckStar

Print Profile

0.2mm layer, 2 walls, 15% infill

Great model!

@melihgundogdu

Lovely design!

@yus81

Print Profile

0.2mm layer, 2 walls, 15% infill

Slightly modified and assembled without glue or screws

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.