JRoQ

cover

IMG_2245_ca25d2d7-ce89-4168-a1f7-6bd8a16178ee.jpeg

IMG_2249_8eafe2d7-eb00-4796-b8d0-431a92d171fc.jpeg

plate_1.png

plate_2.png

IMG_2249_976fe418-f400-40c2-a587-a66dd23c20d3.webp

IMG_2246_48989527-652d-409e-b4f9-ba9849594d5e.webp

plate_1.webp

plate_2.webp

.16mm layer2 walls15 infilldidn't need supports if you keep it laying face down. &nbsp;I used an Arduino micro pro board so my body had to fit that. &nbsp;If you use something smaller, you can decrease the height of the box. &nbsp;My arduino used microUSB so I kept the box open in the back to allow the cable to passthrough. &nbsp;A little dap of hotglue to keep the leds and board in place should do the trick. &nbsp;Mounting is still in the works as you can see I temporarily have it with doublesided tape. &nbsp;Two holes will be used for mounting to something, just haven't figured it out yet. &nbsp;Two options, one with a spot for the board outside of the box, one for fitting everything inside. &nbsp;Still a WIP so will update as it progresses.

0.16mm layer, 2 walls, 15% infill

Rev Limiter Indicator case - Sim Racing SimHub 

Decided to take some LEDs I had laying around and make a large RPM Gauge for my sim racing rig. 24 leds instead of the usual 8 or 16.

RPM Gauge 24 led

ASIA

Print Profile(1)

Description

Comment & Rating (0)

This remix is based on

License

Related Models