Slimer poop bucket/candy holder v2 - Free 3D Print Model

Search models, users, collections, and posts

Misterdoctor

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.24mm layer, 2 walls, 6% infill

Designer

18.8 h

1 plate

4.4(5)

A1 mini

Designer

19.4 h

1 plate

Open in Bambu Studio

Boost

158

251

153

Released

Description

Needs supports for the teeth only.

model printed in ziro translucent green and i painted the eyes will paint teeth later.

i painted in bambu and it takes about 15 hours to print that way.

printed in sport mode also.

.24 layer height

cubic infill, with other infill looks cool as it is transparent.

organic tree and slim is what i used.

using as poop but kids did use it as a candy bowl lol.

Profile has the a1 mini modded figure and also a full figure for a1/p1s/x1c.

the raw file has an uncut model if not using for table top.

V2 Improved the model for better printing and also increased the size of the a1 mini print. changed the supports for better success and easier removal.

Comment & Rating (11)

@smummarv

I have tried to print this 2 times 1 on the x1c and the other on the a1 and both have failed at the top teeth. I am needing this for a march of dimes event that my company participate in every year. is it possible that you could send me the file for just the front 3 teeth and I can glue them on

The designer has replied

@misterdoctor

Yeah, no problem. I'd say if it needs more support maybe change to regular supports and manually paint.

@smummarv

ok thanks I did change the supports on the 2nd print and it failed. I don’t want to print a 3rd time so thanks anyway

@macgyver3944

Boosted

Print Profile

0.24mm layer, 2 walls, 6% infill

https://youtube.com/shorts/7cS4O2_DV9U?si=DuCqEWtNoq_E_285

@smwhit0728

Print Profile

0.24mm layer, 2 walls, 6% infill

Such a fun print! I used Testors model paint to paint in all the details and I used Kingroon Green PLA and had no issues. Thanks for sharing!

@user_322626966

Print Profile

0.24mm layer, 2 walls, 6% infill

Printed without issue on an X1C. Great design, thanks!

@user_230999795

Boosted

Print Profile

0.24mm layer, 2 walls, 6% infill

The body turned out pretty good, but the teeth needed more support.

The profile uploader has replied

@misterdoctor

I updated the model to make sure no more problems with the teeth, i made them thicker, made them better in blender and changed the supports to better ones.

@GreatWhite45

for A1 Mini will be great

@Colton_Prints24

that’s sick but 20 Hours?!?

@user_3546172667

Boosted

Print Profile

0.24mm layer, 2 walls, 6% infill

difficult removal of supports

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.