AMS Active Dryer with Higrometer - NO MOD NEEDED
Print Profile(1)
Description
AMS Dryer using chamber heat!
INFO: Been testing this, and getting not “enough” drying from this!
With only the “active dryer” i get slightly above 60% humidity.
With Silica + “active dryer” I'm getting around 30-40% humidity.
(Almost as same as only Silica, so i think this mod maybe its not that efficient)
I have a lot of problem caused by humidity here in Brazil, and was trying to figure a way to lower the humidty, without making a hole in the AMS.
The Humidity sensor is this really cheap one: https://s.click.aliexpress.com/e/_DkDYObn
*It's not mandatory, there's a file “AMS Riser Right With tube, Without Higrometer hole”.
The magnets are 4x 8x1,5mm: https://s.click.aliexpress.com/e/_DkxNP2h
The Hose i used has 24mm Inner diameter, I included the STEP file for mod if you want, or just send me a message with your common Hose diameter that i'll try to make this change!
I just installed and it started lowering the Humidity, I'll make a timelapse to show the real decrease in humidity!
I'm still testing it, the airflow from the chamber fan is really low, I still don't know if it will be enough to dry the 4 filaments in the AMS.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (34)