iPad Pro 11-inch Drawing Stand - Free 3D Print Model

Search models, users, collections, and posts

YYAYY

Tools>Gadgets

IP Report

GIF

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

6.2 h

2 plates

4.6(42)

0.2mm layer, 2 walls, 10% infill

Designer

6.6 h

2 plates

5.0(10)

80% scaled for A1 Mini – 0.2mm layer, 2 walls, 15% infill

5.5 h

2 plates

5.0(6)

Open in Bambu Studio

Boost

365

960

1.3 k

584

Released

Description

Content has been automatically translated.

Show original

A stand designed for sketching on an 11-inch iPad Pro

Offering three adjustable angles, it boasts commendable stability

Applying ultra-thin, anti-slip pads to the grooves and contact points with the desktop will enhance performance, similar to the example below

Designed to accommodate the 11-inch iPad's camera, ensuring protection against scratches or unevenness caused by protrusions, even without a case

Post-printing, some support structures require removal:

Upon completion, the legs may appear fused; however, they can be easily separated using a tool, and the supports discarded

Note that the legs are directionally distinct; inspect carefully before fully inserting the axles, as removal is challenging despite the rear clearance holes

Assembled result:

↓NEW！！！

Thrilled to see many have printed this stand~ I've identified some areas for improvement, and have uploaded a refined design, welcoming further feedback

The new version enhances the overhang of the leg pivot

Enabling successful printing of the main frame without additional support configuration, significantly reducing failure rates!

Importantly, the legs also require the updated print, with support enabled—the default support configuration is recommended

ipad

paint

support

Comment & Rating (98)

@Nindota

Because my Bambu Studio is using a different account for my work, Makerworld won't let me leave a proper rating. Would it let me, however, I would give this a 4/5. I printed this, and found I had some minor issues with the design, but otherwise found I liked it a fair bit. As I had some issues I know not everyone will share, I created a modified version to better suit my 12.9in ipad pro, as well as added support for different orientations (as I use my ipad with the charging port on the left side, in addition to vertically for specific applications, and need access to the charging port for my headphones.) On another note: I found this printed significantly smoother when printed along the Y axis as opposed to the X axis since it causes less wobble and vibration by comparison. I will refrain from uploading my version as a remix unless given direct permission to do so.

The designer has replied

@737265940

Cool~ It's clearly meticulously optimized, feel free to upload it unless it's for sale, perhaps it can help someone in need

Show original

@user_1674466684

can your share your remix? would love to print it.

@Nindota

Replying to @737265940 :

Completely forgot to get around to uploading the remix, but it appears the license you selected prevents me from uploading it as such to MakerWorld. Until you change the license you have on the model, I will be unable to upload the remix to the site.

@qDan

Boosted

I just uploaded a print profile which scales the stand to 80%, so you can print on a A1 mini. The smaller version works fine for my 11" iPad Pro M4. Only the legs are a bit tight in the case. But that way it doesn't wobble! ;-)

(Edited)

The designer has replied

@737265940

Fantastic~! Your version might also be better suited for iPad mini users

Show original

@TxMoose

Print Profile

0.2mm layer, 2 walls, 15% infill

minor drooping on undersides of the structure that were bridged, but otherwise, excellent quality. printed this for a friend, will update later with if he is satisfied with the functionality.

The profile uploader has replied

@737265940

Excellent print! You even cleverly added two massive supports~ So stable hahaha. Initially, to save on support material, I painstakingly hand-crafted a few tiny supports (doge), but adding supports definitely makes it more stable

Show original

@TxMoose

Replying to @737265940 :

ahh, you give me too much credit 😅I just let Bambu studio generate some tree-style supports. in the future, I’ll load up some regular PLA for those supports. they were a little big to be printed from the PLA-CF, but overall, really happy with the model!

(Edited)

@mfac_42

Print Profile

0.2mm layer, 2 walls, 10% infill

Great. Printed with white PLA+. Thanks!

The profile uploader has replied

@737265940

Thanks for the feedback~! This white is so beautiful

Show original

@pokopower

Boosted

Print Profile

80% scaled for A1 Mini – 0.2mm layer, 2 walls, 15% infill

Easy to print and great design. A great addition to my desk!

@NovaPrintssatx

Print Profile

0.2mm layer, 2 walls, 15% infill

it’s good but had massive overhangs with pla cf

The profile uploader has replied

@737265940

Sorry friend this result is terrible I am not sure if you enabled high-speed printing when printing using PLA CF might require lowering the speed to get good results

Show original

@doorfer

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

this is a fantastic design!! I’ve been using it in front of my work keyboard to help me take notes. like that you can get it to 3 different heights and I didn’t have to pull off support!